Search found 16 matches
- Mon May 14, 2012 2:29 pm
- Forum: Trojan Boats Forum
- Topic: need part
- Replies: 1
- Views: 1819
need part
sorry if I have posted this in the wrong section it would not let me post in for sale area. Im looking for a rear "Bar Island" for my 1990 10 meter mid cabin. I dont know the real name for it. mine did not come with the boat. I can recondition it, dont need fridge, sink, etc. also interest...
- Wed Jan 19, 2011 8:00 am
- Forum: Trojan Boats Forum
- Topic: Needed F32 Heads
- Replies: 3
- Views: 2582
- Tue Jan 18, 2011 8:56 am
- Forum: Trojan Boats Forum
- Topic: Needed F32 Heads
- Replies: 3
- Views: 2582
Needed F32 Heads
I need a set of heads for a 1984 F32 Chrysler 360's "crusaider"
old set to far gone. any help...
sorry if this is not in the right section.
old set to far gone. any help...
sorry if this is not in the right section.
- Sun Dec 26, 2010 10:24 am
- Forum: Trojan Boats Forum
- Topic: 10 meter repower
- Replies: 96
- Views: 41393
300 horse... per cylinder? sooo your cranking 1200 horse out and only doing a 7.70 quarter mile? what are your 60 foot times? 4.80 1/8 and 1.1 60ft. 6500 rpm 2 step on trans brake shifting 9500 rpm . 456 gears 32x14.5x15 tires chassis weight 1704 without driver 74 mm turbo on m1 meth. and 12 150 po...
- Thu Dec 23, 2010 11:51 pm
- Forum: Trojan Boats Forum
- Topic: 10 meter repower
- Replies: 96
- Views: 41393
my screen name has to do with Drag Racing...but i have been 7.70et @ 182mph but thats not impressive to you im sure... even if it was done with a 4 cyl. 2.0L 112 cubic inch more than 300HP per cyl. no nitrous. so what i am doing is by far not pushing the bar. but something that takes my mind off dra...
- Wed Dec 22, 2010 8:07 am
- Forum: Trojan Boats Forum
- Topic: 10 meter repower
- Replies: 96
- Views: 41393
- Mon Dec 20, 2010 7:13 pm
- Forum: Trojan Boats Forum
- Topic: 10 meter repower
- Replies: 96
- Views: 41393
I don't know how the extra power will affect a 10M Trojan but I found it to be both good and bad on my F- Series hull. The additional torque is is great when in rough water or getting a heavy load up on plane. The extra top end however does not agree with the modified V hull and I find that it gets...
- Mon Dec 20, 2010 9:53 am
- Forum: Trojan Boats Forum
- Topic: 10 meter repower
- Replies: 96
- Views: 41393
A race car that runs the 1/4 mile has nothing to do with a boat engine the runs under high load for hours . Air flow and shroud's have nothing to do with cooling a boat engine . the size of the heat exchanger is the key ( and a water pump to match . yours is made for a stock engine . won't cut it o...
- Sun Dec 19, 2010 9:02 pm
- Forum: Trojan Boats Forum
- Topic: 10 meter repower
- Replies: 96
- Views: 41393
The first question I would ask is : If it ran well and you can get 33 out of it (pretty good for that model I think), why do you think you need to rebuild? With that kind of performance, the engines don't sound tired to me. the old owner lacks the skills to put gaskets on and the engines seen a lot...
- Sun Dec 19, 2010 8:56 pm
- Forum: Trojan Boats Forum
- Topic: 10 meter repower
- Replies: 96
- Views: 41393
I used to drag race cars! i currently have a 7 second 1/4 mile 4cyl. cooling isues in cars come from lack of air / shrouds and poor water circulation. Why is it if someone rebuild a motor over stock it is all of a sudden the reason why it breaks! instead if the builder builds it to handle more than ...
- Sun Dec 19, 2010 2:26 pm
- Forum: Trojan Boats Forum
- Topic: 10 meter repower
- Replies: 96
- Views: 41393
Maybe you can mount a few new 100 gal fuel tanks on the bow :lol: But seriously.... what do plan on using the boat for?? Ron 8) i am on lake ERIE and i have 2 125 gal fuel tanks i can go any where with that much. but really i usually cruse around 26 mph on gps and this year i pushed the motor at th...
- Sun Dec 19, 2010 2:15 pm
- Forum: Trojan Boats Forum
- Topic: 10 meter repower
- Replies: 96
- Views: 41393
Big Big mistake leave it stock . You need the low end of a stock engine to get it on top. The over lap of a H.O. cam cause issues with sucking water back in causeing stuck valves . The cooling system will need to be changed to handle the extra heat . The Velet drives will need to beefed up . larger...
- Sun Dec 19, 2010 1:34 pm
- Forum: Trojan Boats Forum
- Topic: 10 meter repower
- Replies: 96
- Views: 41393
10 meter repower
OK! i not sure if i fell off the deep end.. my boat is a "88" Trojan 10 meter. this boat ran ok this year 33 mph on gps witch feels great in this size boat. i need to rebuild the motors so i feel like doing a stroked 454. now i thought i would get some info from others here. anybody do any...
- Tue Jul 27, 2010 8:32 pm
- Forum: Trojan Boats Forum
- Topic: MANIFOLDS AND RISERS REPLACEMENT crusader 454
- Replies: 4
- Views: 4165
i cant tell you what it cost! but i did do mine my self last weekend. with a set of replacement manifolds from Revolution Marine they are all aluminum. my boat came with these but they where leaking bad from the gasket. so i removed them cleaned and resealed the manifold and riser. wile i was there ...
- Mon Jul 26, 2010 7:58 am
- Forum: Trojan Boats Forum
- Topic: NEW Trojan Owner
- Replies: 13
- Views: 6161
Thanks to all of you. the motors don't have a lick of a miss idle is about 650rpm. The manifolds and risers are all new Revolution Marine units, it also has Elderbrock performer aluminum intake manifolds. I just replaced the Seawater pump, almost all cooling lines, plugs,cap,rotor,valve covers and g...