Trojan Boat Forum

If you are talking about the plumbing for the Galley, Head, etc., I have a 1981 10 meter and got plumbing fittings at the local RV store.

The horn relay on my 10 meter is in the area behind the helm. Also located there is the horn compressor.

For temperatures from 30-100 use straight 30 wt. For temperatures from 60-100 use straight 40 wt. For temperatures from 80-100 use straight 50 wt. For temperatures from 20-100 use 20W-40 or 20W-50. For temperatures from 0-80 use 10W-30 or 10W-40.

Hard to see, but the Forward Sling is located between the 2 port lights, and the Rear Sling is located at the rear of the forward vent. Hope this helps. The stickers on the 121 Meter here were faded. http://i940.photobucket.com/albums/ad243/flyboyharris/12%20Meter%20FWD%20Sling_zpsbfkfjrfx.gif http:...

There is a 12 meter at our marina, will take pictures this weekend

Looked at the secondaries this weekend, they seemed to work okay. Worked them open and closed several times by hand, put sparknarrester back on. Took boat out and port engine makes power now. Thanks for the input.

++ on the thru hull fittings. I sucked a fish up once, part of it got sucked into the thru hull inlet and got stuck there. Did not know it was a fish at the time, I back flushed the hose and the fish come floating out from under the boat with its side bulging out.

Thanks

Thanks, will check that for sure this weekend.

Thanks for the pics, I will look at them this weekend. The port engine is not making power, it was earlier this year. Runs great up to about 2500 rpm, then just won't do much better.

I have seen several posts about anti siphon valves on the F series boats, donthe meter boats have the same arrangement?

I am not an expert, however my Velvet Drive transmissions have the ability to change direction by rotating the pump housing cover plate 180degrees. I am pretty sure the engines on my 81 10 meter international rotate same direction.

Here are some pictures of the latch on my 10 meter. I have removed the 4 screws from both sides of the latch but nothing comes apart, the plastic pieces just wiggle around. http://i940.photobucket.com/albums/ad243/flyboyharris/Door%20pic%203_zpsifkcqzhu.jpg http://i940.photobucket.com/albums/ad243/f...

Okay,
I talked to Beacon Bob and they got the drawings out and they have no idea how to get the latch off either.
Will keep trying.

Don't want to highjack the post, but how do I get ahold of John Leads.