Search found 31 matches

by bssmnbll
Thu Oct 24, 2019 8:01 pm
Forum: Trojan Boats Forum
Topic: 1976 F-32 Fuel Line Size
Replies: 7
Views: 909

Re: 1976 F-32 Fuel Line Size

I also just had two mechanical fuel pumps rebuilt. It seems no one in USA makes mechanical anymore. Even Holley is made offshore. The ones available are pressed together and the fittings are different.
by bssmnbll
Thu Oct 24, 2019 7:56 pm
Forum: Trojan Boats Forum
Topic: 1976 F-32 Fuel Line Size
Replies: 7
Views: 909

Re: 1976 F-32 Fuel Line Size

Lots of luck on that!! they have been discontinued. I think I had a AC439 and a wix # but cannot cross or find anything to fit.
by bssmnbll
Sun Jul 07, 2019 1:34 pm
Forum: Trojan Boats Forum
Topic: water tank
Replies: 4
Views: 1877

Re: water tank

We have a 1976 F32, and is a sport fish model so the tank is underneath the sole of the cabin. It too is attached to the plywood of the floor but I don’t know if the plywood is the top or not, but will be pulling it out.
by bssmnbll
Sat Jul 06, 2019 5:14 pm
Forum: Trojan Boats Forum
Topic: water tank
Replies: 4
Views: 1877

Re: water tank

Me too. Ours had a leak before but this year it won’t hold water, going to take it out and glass it completely
by bssmnbll
Fri Jul 05, 2019 10:28 am
Forum: Trojan Boats Forum
Topic: cutlass Bearing
Replies: 3
Views: 1119

Re: cutlass Bearing

I cannot remember the # of the bearing, but bought a tool to remove/replace without pulling the shaft. Did this a year ago and was very simple task.
by bssmnbll
Fri Jul 05, 2019 10:05 am
Forum: Trojan Boats Forum
Topic: Sparky sparky Update distributor
Replies: 2
Views: 690

Re: Sparky sparky Update distributor

I am not that familiar with the 454, but suprised you still have points in 88. I am running 76 Chryslers with oem electronic and am going to put in Pertronics, it made a difference in my old 50 Merc flathead.
by bssmnbll
Fri Jul 05, 2019 9:49 am
Forum: Trojan Boats Forum
Topic: cutting off at idle in gear
Replies: 14
Views: 1790

Re: cutting off at idle in gear

Playmate, we are in Md, on the magothy river, Cape St. Claire, I never got around to a profile. Bill Coby, before he retired, owned Coby Marine, and was a good Chrysler mechanic. Wish I could find another,lol.
by bssmnbll
Fri Jul 05, 2019 9:40 am
Forum: Trojan Boats Forum
Topic: cutting off at idle in gear
Replies: 14
Views: 1790

Re: cutting off at idle in gear

I have had the same problem for over 20 years on a 76 F32 with 360 engines. I have put the same Edelbrock on the starboard, to see if it would make a difference. NO difference. I have gone thru the ignition also, and as we type, I have a Pertronics in the mail. I will try anything at this point. Que...
by bssmnbll
Sun Sep 23, 2018 7:59 am
Forum: Trojan Boats Forum
Topic: COIL HEATING UP AND CUTTING OUT
Replies: 14
Views: 2179

Re: COIL HEATING UP AND CUTTING OUT

Horhay1946, the only #s on my distributors are the Chrysler#36759 and #1354. the latter is a " coast guard" marine # according to a person I talked to at Pertronix. The same person said they could not id either of those #s so they could not supply a kit for me. That is why I wondered if you had the ...
by bssmnbll
Tue Sep 18, 2018 4:35 pm
Forum: Trojan Boats Forum
Topic: COIL HEATING UP AND CUTTING OUT
Replies: 14
Views: 2179

Re: COIL HEATING UP AND CUTTING OUT

Horhay1946, do you happen to have the Pertronix kit #? I called Pertronixs with the Chrysler distributor # I have on a 76' 360 and they told me they had nothing to fit it, but I would think it would be the same as a car without the vacuum advance. Anyway, I am still looking.
by bssmnbll
Thu Sep 13, 2018 8:55 pm
Forum: Trojan Boats Forum
Topic: F32 scrap the boat or repair stringers?
Replies: 11
Views: 2241

Re: F32 scrap the boat or repair stringers?

I would be interested in parts also, hate to see the boat go that way. What is your aft deck made of , is it teak or fiberglass?? Also, do you have stock rudders? Thanks, Bill Nelson
by bssmnbll
Tue Sep 11, 2018 4:38 pm
Forum: Trojan Boats Forum
Topic: COIL HEATING UP AND CUTTING OUT
Replies: 14
Views: 2179

Re: COIL HEATING UP AND CUTTING OUT

My 76 Trojan with 360's has same problem. Can you put Pertronics in the original Chrysler distributor or must you get another dist?? I have changed the coil and ballast resisters with no change. Engines run fine until I slow down to dock, them they die but will start right back up.
by bssmnbll
Sat Aug 25, 2018 1:29 pm
Forum: Trojan Boats Forum
Topic: 1974 f32 floor rebuild info needed
Replies: 9
Views: 2736

Re: 1974 f32 floor rebuild info needed

Did you ever get this job done? I have a 76 F32 sport fisher in need of an aft deck .and can use all the help I can get. bssmnbll@aol.com
by bssmnbll
Wed Jul 05, 2017 12:27 pm
Forum: Trojan Boats Forum
Topic: F-32 fresh water tanks
Replies: 11
Views: 2189

Re: F-32 fresh water tanks

does anyone know where to get a replacement fresh water tank for a 76 F32??
by bssmnbll
Wed Jul 05, 2017 12:20 pm
Forum: Trojan Boats Forum
Topic: F-32 fresh water tanks
Replies: 11
Views: 2189

Re: F-32 fresh water tanks

does anyone know where to get a replacement for the water tank on F32's. Mine only holds a little water, then starts filling the bilge. Guess taking it out will tell the story. Hell of a time right in middle of summer.