Search found 9 matches

by blackfin
Mon Sep 21, 2015 1:44 pm
Forum: Trojan Boats Forum
Topic: trim around f32 sliding door?
Replies: 6
Views: 3439

Re: trim around f32 sliding door?

Got it, frame sits right on the plywood floor on the older wooden deck f32's. I used a piece of aluminum angle siding to protect the plywood and act as a drip rail under the door frame. Im cleaning her up tonight and ill post some pictures in my build thread tonight. Thanks!
by blackfin
Fri Sep 18, 2015 12:33 am
Forum: Trojan Boats Forum
Topic: trim around f32 sliding door?
Replies: 6
Views: 3439

Re: trim around f32 sliding door?

Yeah the angle brackets. Im sure i can see glass over them now in your pic,so the brackets are on the inside. Does the frame sit right on the salon plywood floor? I have a 1/2 between the frame and the roof, so it either gets a hardwood cap or sits on something other than the plywood floor. Its roug...
by blackfin
Wed Sep 16, 2015 8:04 am
Forum: Trojan Boats Forum
Topic: trim around f32 sliding door?
Replies: 6
Views: 3439

Re: trim around f32 sliding door?

Do the metal corner gussets at the top corner of the frame go inside or outside? This thing is ready to screw down as soon as i figure it out. Ive been searching pics for days, its not a often photoed area! Thanks
by blackfin
Mon Sep 14, 2015 10:51 am
Forum: Trojan Boats Forum
Topic: trim around f32 sliding door?
Replies: 6
Views: 3439

trim around f32 sliding door?

Im installing my sliding glass door frame to get a floor height for the f32 i bought .Does the metal frame just rest up on the salon roof with no wood in between? This boats interior and floor from salon back is completely disassembled, so trying to get her back together. Ill be starting a build thr...
by blackfin
Fri Sep 04, 2015 9:21 pm
Forum: Trojan Boats Forum
Topic: 1974 f32 floor rebuild info needed
Replies: 9
Views: 7192

Re: 1974 f32 floor rebuild info needed

Thanks so much every one! Im going to pick up the materials tomorrow and start on it. Ill report back with some pictures of the progress and turn this into my build thread.Thanks again!
by blackfin
Thu Sep 03, 2015 11:25 pm
Forum: Trojan Boats Forum
Topic: 1973 Stalling After Running
Replies: 30
Views: 13104

Re: 1973 Stalling After Running

Sounds like it could be the float level or needle and seat. Does she stall every time the bow drops when you let off the throttle quickly? To check float level loosen the screw on the side of each fuel bowl.Fuel should just dribble out with the engines running.
by blackfin
Thu Sep 03, 2015 7:04 pm
Forum: Trojan Boats Forum
Topic: 1974 f32 floor rebuild info needed
Replies: 9
Views: 7192

Re: 1974 f32 floor rebuild info needed

Perfect! Thanks! Thats exactly how I thought the wood went in.Anyone ever glass in the plywood outside the sliding door?
by blackfin
Thu Sep 03, 2015 2:31 pm
Forum: Trojan Boats Forum
Topic: 1974 f32 floor rebuild info needed
Replies: 9
Views: 7192

Re: 1974 f32 floor rebuild info needed

Heres a quick photo of what im working with.
by blackfin
Thu Sep 03, 2015 1:48 pm
Forum: Trojan Boats Forum
Topic: 1974 f32 floor rebuild info needed
Replies: 9
Views: 7192

1974 f32 floor rebuild info needed

I just picked up this 1974 f32 with no floor from the engines back. Id like to return the floor to original but have seen a few versions of hatch orientation. It looks to have had plywood flooring over the engines but i cant tell if it was plywood or what outside the sliding glass doors/above the ta...