Trojan Boat Forum

I know I appreciate it when people post this kind of thing, so I thought I would share. I have the original electrical wiring diagram for my Chrysler 440 engines. This was scanned from my boats original owners manual It is a 1981 F-36 460 if that helps. https://drive.google.com/file/d/0B2mHkDSShsinO...

Ok. Looks like there is not much interest in this type of theng.

Thank you

Carl

I am starting to remodel my f36 and am starting to pull old parts that are no longer needed. I believe most / all the parts I am pulling are original. Is there a market for these original parts? Sentry battery charger C120-3NL 3 burner electric stove built in microwave galley sink Any advice would b...

So I am making this post in hopes that one of you might have an idea where I can locate something. I am trying to repair some of the battery wiring on my F36. The challenge is I do not have all the wiring diagrams. Now before you hit the reply button, take a look at the links below. I already have m...

So I am pretty sure the alternators are bad on my boat. I tried taking them to the auto-parts store and the employee there was lost on how to test them on their equipment. He wanted to know the car it came from and I told him it was on a mopar big block 440 (7.2l) (I have Chrysler engines in my F36)...

Wow! I don't remember have any difficulty accessing mine when I installed them :) http://i1362.photobucket.com/albums/r696/barrieh/IMG_20160130_125208459_zpsllzuxtrx.jpg Just Kidding. That does sound like bad timing I just realised your engines are likely under the salon :oops: LOL! Yupp, taking ev...

prowlersfish wrote:Sedan/conv or tri cabin ?

Not sure. Sedan maybe?
Here is a link to the picture
https://goo.gl/photos/4vDZC2NzqRhFQrPZ8

Thank you for the reply. I wonder if there is a reason to not mount them in an easier place to access. Last weekend I had a hose bust and replacing it was a real nightmare because the oil coolers were loose and hard to reach. I am sure it looked comical to see me trying to contort into place while i...

Allen Sr wrote:Did you try Bob at Beacon Marine the sponsor of this sight?

I had looked in the past to see if he had any listed, but did not see any.
I will give him a ring and see if he has any inventory that is not listed on the website.

Thank you for the warm welcome. I will get some pictures posted soon and look forward to the experience!

Carl

I am wondering if anyone can conform the mounting position of the two oil coolers for the engine and transmission. I have a Chrysler 440, and both are just zip tied below the engine in a horizontal orientation. I have seen some pictures where they are mounted vertically on each side of the transmiss...

I would be interested in them. Where are you located?

Carl

On this topic. I have an 81 F36 with what I think are the original (fuel) filler caps. One was seized and required I drill a large hole in the center of it so that I could use a large ease-out to remove it and now I am searching for a replacement. I have tried several off the aftermarket filler caps...

I purchased a well loved, but long retired F-36 last July. I have been watching some posts and finally decided to register and say "Hello". I have been working on it and getting it back in cruising condition over the past 10 months. We just finished a 2 day cruise to move it to the Houston...