Search found 713 matches

by g36
Tue Dec 17, 2019 8:27 pm
Forum: Trojan Boats Forum
Topic: U-line Model 45A Ice Maker: Ice Bucket?
Replies: 10
Views: 8720

Re: U-line Model 45A Ice Maker: Ice Bucket?

Might want to check at a boat salvage yard. When I needed an extra ice bucket I found one it was $5.00.
by g36
Wed Oct 09, 2019 2:23 pm
Forum: Trojan Boats Forum
Topic: Crusader 454 xli fuel issue?
Replies: 7
Views: 7301

Re: Crusader 454 xli fuel issue?

If it's like my 97 xli 454's you have 3 fuel filters. First in line is a 24 micron oberg screen which looks like a black round "ufo" this filter can be cleaned and reused . The 2nd is a water seperator 10 micron and the 3rd is located at the throttle body is a cannister inline filter. My s...
by g36
Mon Aug 21, 2017 9:22 am
Forum: Trojan Boats Forum
Topic: FUSE OR BREAKER FOR FRIDGE ?
Replies: 9
Views: 6409

Re: FUSE OR BREAKER FOR FRIDGE ?

Pull the fridge out and check wires going to it with a volt meter. There also may be a fuse there inline. I asked earlier what fridge make model do you have? Would be easier to help.
by g36
Thu Aug 17, 2017 7:23 am
Forum: Trojan Boats Forum
Topic: FUSE OR BREAKER FOR FRIDGE ?
Replies: 9
Views: 6409

Re: FUSE OR BREAKER FOR FRIDGE ?

sorry dont have your boat model but if theres not a specific ac breaker marked its probably piggybacked to a breaker that powers your galley outlets. i would think theres a dc fuse/breaker for it seperately in the dc panel, but who knows. you can pretty much bet there will be some protection fuse et...
by g36
Thu Aug 17, 2017 7:13 am
Forum: Trojan Boats Forum
Topic: fuel flow sensor question
Replies: 2
Views: 3038

Re: fuel flow sensor question

if your just monitoring fuel useage then one sensor for each engine inline which is 2 and installed after the selector valve. but if your trying to keep up with how much fuel used/left in the fuel tanks then 4 one on each tank before the selector valve. when i had installed mine although lowrance se...
by g36
Thu Aug 10, 2017 11:33 am
Forum: Trojan Boats Forum
Topic: Digital Dash and automation on Trojan F36 tri-fly
Replies: 31
Views: 24751

Re: Digital Dash and automation on Trojan F36 tri-fly

Thanks I figured for the ip cameras on the public wifi vpn would be the way to go. I ll check your suggestions what I would have to do, just haven't set a vpn up before or a rasberry. I have 35 yrs in medical equipment electronic repair so your project is right up my alley.
by g36
Mon Aug 07, 2017 5:26 pm
Forum: Trojan Boats Forum
Topic: Water pressure
Replies: 16
Views: 10328

Re: Water pressure

If you get good flow from the dock water then low flow with the pump then the problem will be with your pump and not the water lines or faucets . Have you tried hooking to dock water? If low both ways check what i posted earlier . You should also locate your 12v water pump and see if it doesnt have ...
by g36
Mon Aug 07, 2017 3:10 pm
Forum: Trojan Boats Forum
Topic: Digital Dash and automation on Trojan F36 tri-fly
Replies: 31
Views: 24751

Re: Digital Dash and automation on Trojan F36 tri-fly

I noticed your showing cameras in structure and a connection to public wifi. Are you planning on viewing these while away from the boat. I was using ip cameras till my marina went to a public wifi system and have found no open ports for incoming connection as would be the norm on that wifi. So I was...
by g36
Mon Aug 07, 2017 2:55 pm
Forum: Trojan Boats Forum
Topic: Water pressure
Replies: 16
Views: 10328

Re: Water pressure

What does "water tank pressurized mean"? Dock water or pump pressure from the boats pump? Is it bad either way? Have you checked the faucets if they have a screen that will screw off like at home? May have debris trapped there. The water at the dock may be weak or your pressure reducer at ...
by g36
Thu Jun 22, 2017 10:32 am
Forum: Trojan Boats Forum
Topic: Halogen to LED
Replies: 3
Views: 3178

Re: Halogen to LED

My carver 405 has the same hera halogens. There is no transformer or regulator they are wired to 12v circuit I'm pretty sure yours is too. I replaced all mine with leds If the fixtures are in good shape just replace the bulbs with something like this ive had these installed about 3yrs now for $2.88 ...
by g36
Mon Mar 20, 2017 11:00 pm
Forum: Trojan Boats Forum
Topic: 1972 F-36 Salon window leaks
Replies: 13
Views: 9088

Re: 1972 F-36 Salon window leaks

If interested I have new h channel I purchased for my f boat I ended up selling the boat so never installed it would like to sell at a good price if your interested pm me.
by g36
Sat Jan 28, 2017 8:23 am
Forum: Trojan Boats Forum
Topic: Window channels
Replies: 6
Views: 4831

Re: Window channels

Hi sent you a message
by g36
Mon Jan 23, 2017 10:01 am
Forum: Trojan Boats Forum
Topic: Window channels
Replies: 6
Views: 4831

Re: Window channels

i have a complete set of f32 window channels from beacon i bought when i had my f32, never installed them and my boat is long been sold. contact me if your interested
by g36
Thu Dec 15, 2016 7:12 pm
Forum: Trojan Boats Forum
Topic: Parts F32
Replies: 6
Views: 6172

Re: Parts F32

I have some stuff left from when I had a f32 including all front v berth cushions and other stuff if you want to pm me I might be able to help
by g36
Fri Sep 30, 2016 6:38 pm
Forum: Trojan Boats Forum
Topic: ac install
Replies: 7
Views: 6254

Re: ac install

Come on to tennessee in the summer when it's mid 90's plus for over 100 days this summer and mid 80's at ni gh t and humidity in the 70's and try getting by without ac. This is the first weekend we will be Able to get a decent nights sleep with no ac. Fall is finally getting close.