Trojan Boat Forum

Dejavu! post some pictures of the storage area disassembled if you get a chance. I think that's one of the only areas that I didn't tear out in my boat! hang in there!

Bob told me about the dow 795, use it! If you cant find it locally you can order it from McMaster Carr. I did mine 3 different times before finally using the dow 795. my original skylights were held in with at least 25 screws each. I tried removing them and re-bedding with 4000uv , they leaked. then...

I just read all of your comments to my wife. She was laughing so hard I think she almost peed her pants! Thank you everyone!

Sorry for dredging up such an old post but I thought it was time to give everyone who followed my renovation (Especially RWS!) a good laugh at my expense! Since selling the Trojan we picked up a mobile home down the beach. Since my best friend has a 25 ft center console for our offshore excursions I...

wow! thats some nasty stuff that came out of that tank. cant believe its that corroded on the inside! check and make sure your gas fill cap has the correct rubber o ring to seal the water out. I hate to say it but make sure that you clean and inspect the other tank. I think I asked you the other day...

Absolutely Harris! I will try to update my old "renovation" post with an update on my current situation so you guys can laugh your asses off at me. I'll give you a hint, it's brand new, it's currently being built for me and it floats.

I know you already know this Bob but I'm going to mention it anyway. Be sure to seal up the balsa core material after you cut the hole. Mine was done less then perfect and was very rotted.
Todd

I have a fiberglass base for the 10 meter mid cabin that would go in the cockpit across from the wet bar. I don't think it's the same as what your looking for but wanted to mention it in case I'm mistaken

Luv the sticker Bob!

Very nice work Bob! It looks awesome!

lol, when i saw the picture of the 3ft hole in the bow i actually thought "hell i could fix that!" lmao.

Hi guys, just saw a guy whos parting out a 1985 10 meter express on facebooks "trojan boat owners club" group. its in Madison Heights MI. it fell off blocks in the parking lot and punched a hole in the bottom. guy said he would ship parts too. his name is Brandon noll. could be a good way ...

The guy who purchased the boat from me has a few kids younger then mine. Nice to know that a family will enjoy her.

3 blade props. 17x17. had mallory dist with electronic conversion kits originally. switched to delco voyager electronic ignition . I would first make sure your engine is tuned properly. spark plugs and wires good , spark arrestor clean, timing etc. make sure the boats bottom is clean. Then get the e...

just did a sea trial while selling my mid cabin 21mph at 3000k rpm . i will add that we only got 4000k wot. props may need to be tweaked a bit but think the timing is slightly off. You should be getting better then 23 wot. I hit 33mph at 4300rpm running with the tide before my renovation. It was rig...