Search found 95 matches
- Sun Oct 20, 2019 3:21 pm
- Forum: Trojan Boats Forum
- Topic: F32 patio glass removal
- Replies: 18
- Views: 14794
Re: F32 patio glass removal
Had the engines out of my 81 F-32 twice. Didn't have to remove the side glass (door removed). Installed thru the door angled with the transmission attached. Put duct tape on the 2 edges of the door to prevent scratches. The dip stick was removed as it sticks out beside the exhaust manifold. The eng...
- Mon Sep 24, 2018 9:39 pm
- Forum: Trojan Boats Forum
- Topic: Flybridge Core project
- Replies: 10
- Views: 10503
Re: Flybridge Core project
Wow that looks great. Good idea to go after the whole area at once. I did a small section on mine and now need to chase it a bit further.
- Wed Jun 06, 2018 12:42 am
- Forum: Trojan Boats Forum
- Topic: Cleaning fabric covering hull in V berth
- Replies: 1
- Views: 1876
Cleaning fabric covering hull in V berth
Any suggestions on how to clean the fabric covering the hull? It needs some cleaning and I am afraid I will stain it of change the look by cleaning it.
- Sun Dec 24, 2017 10:48 pm
- Forum: Trojan Boats Forum
- Topic: F-32 Performance Curves
- Replies: 16
- Views: 11908
Re: F-32 Performance Curves
Bob,
Do you have numbers for a 1990 F32 with 270 crusaders and 16x16 props?
Thanks
Do you have numbers for a 1990 F32 with 270 crusaders and 16x16 props?
Thanks
- Fri Oct 06, 2017 5:53 pm
- Forum: Trojan Boats Forum
- Topic: Potable water plumbing layout 1990 F32
- Replies: 5
- Views: 4411
Re: Potable water plumbing layout 1990 F32
Mine is a sedan. The water lines under the cockpit have become very brittle and the outside is disintegrating.
- Tue Sep 05, 2017 8:24 pm
- Forum: Trojan Boats Forum
- Topic: Potable water plumbing layout 1990 F32
- Replies: 5
- Views: 4411
Potable water plumbing layout 1990 F32
I was hoping someone may have a drawing of the layout of the plumbing on a 1990 F32. The lines under the cockpit have become very brittle. I have done a temporary repair to get me thru the end of the season but thinking I should probably replace all of the lines.
- Tue Jul 11, 2017 12:33 pm
- Forum: Trojan Boats Forum
- Topic: Size of the AC unit for an F32
- Replies: 20
- Views: 9792
Re: Size of the AC unit for an F32
I would say it is one of 3 things:
1. Drain hose is clogged
2. Drain pan has a hole in it
3. Weight in the boat has been redistributed and the drain is no longer the low point
First guess would be a clogged drain line.
1. Drain hose is clogged
2. Drain pan has a hole in it
3. Weight in the boat has been redistributed and the drain is no longer the low point
First guess would be a clogged drain line.
- Tue Jul 19, 2016 8:22 pm
- Forum: Trojan Boats Forum
- Topic: "Slave Solenoid"
- Replies: 8
- Views: 4891
Re: "Slave Solenoid"
Yes that is a solenoid. The smaller terminals should be grounded to complete the circuit. I just rebuilt my starters and replaced the solenoids while I was there. The guy who rebuilt my starters ordered me the solenoids. I used ones that are for electric lift gate trucks. They are rated for continuo...
- Sun Apr 24, 2016 9:43 pm
- Forum: Trojan Boats Forum
- Topic: Fuel Fill O-Rings
- Replies: 13
- Views: 12430
Re: Fuel Fill O-Rings
Well I finally got around to figuring out what O rings I needed. I ordered several sizes and this is what I found out. 1/8" x 2" ID - this size was on my boat but I found they favored the outside of the groove and did not fill the groove 1/8" x 1 7/8" ID - This favored the inside...
- Sat Apr 16, 2016 6:09 pm
- Forum: Trojan Boats Forum
- Topic: Canvas Projects
- Replies: 8
- Views: 5230
Re: Canvas Projects
Wow looks great! Can't wait to see your work on the enclosure.
Please post pictures.
Please post pictures.
- Wed Apr 13, 2016 7:33 pm
- Forum: Trojan Boats Forum
- Topic: Thoughts/idea formore life from riser (crusader)
- Replies: 7
- Views: 5187
Re: Thoughts/idea formore life from riser (crusader)
When I change my risers and elbows I will be changing to the way my last F32 was set up. It used the 2" spacer with the hose connection between the riser and elbow as the outlet for the closed cooling. The stainless block off plate goes between the 2" spacer and the elbow and acts as the b...
- Mon Apr 11, 2016 8:45 pm
- Forum: Trojan Boats Forum
- Topic: Starboard Volt gauge is dancing
- Replies: 15
- Views: 8059
Re: Starboard Volt gauge is dancing
The "can" is a capacitor. It's function is to take the noise out that a rotating type generator will produce. Without it you risk transferring that noise into radios as a whine that changes with rpms. As you stated a connection could certainly be at fault. May be worth switching batteries ...
- Fri Jul 24, 2015 7:55 pm
- Forum: Trojan Boats Forum
- Topic: F-32 Deadrise for through-hull transducer
- Replies: 9
- Views: 4908
Re: F-32 Deadrise for through-hull transducer
How well do the shoot thru transducers work? as well as a traditional transducer?
- Sun Jul 19, 2015 10:49 pm
- Forum: Trojan Boats Forum
- Topic: Air conditioner for an F32
- Replies: 15
- Views: 13620
Re: Air conditioner for an F32
I have installed a mermaid system in my 1985 and my 1990 has a cruiseairr system installed.
Make sure you get one that the controls allow a deicing mode.
Also my boat is in mystic if you would like to take a look.
Make sure you get one that the controls allow a deicing mode.
Also my boat is in mystic if you would like to take a look.
- Sun Apr 05, 2015 7:45 pm
- Forum: Trojan Boats Forum
- Topic: What is the lowest point in the engine room bilge on F32
- Replies: 15
- Views: 8404
Re: What is the lowest point in the engine room bilge on F32
ready123 - With the saddle tanks the low point at rest in is the engine room not aft. When underway it all depends on your trim etc. On a side note last spring I had dropped a 9/16 socket in the bilge and it went under the generator. Being unable to get to it I had left it there thinking it would no...