Search found 77 matches
- Sat Nov 19, 2016 9:59 am
- Forum: Trojan Boats Forum
- Topic: Props
- Replies: 8
- Views: 5949
Re: Props
Finally got to the Marina yesterday, nice warm day. Removed about thirty seven layers of bottom paint, with a wire brush on a drill motor, to read the numbers on the prop. Turns out they are 14X12. I wonder if this was done for better fuel economy will sacrificing a higher top speed. I normally run ...
- Tue Nov 01, 2016 11:48 am
- Forum: Trojan Boats Forum
- Topic: Trojan F Boat Model Numbers
- Replies: 7
- Views: 36324
Re: TROJAN F BOAT MODEL NUMBERS
Hate to yell you but you forgot the F-31.
- Tue Nov 01, 2016 11:46 am
- Forum: Trojan Boats Forum
- Topic: Props
- Replies: 8
- Views: 5949
Re: Props
I don't have a listing on the F31 , But Assuming you have a 1 to 1 gear on you 318s this sold be close F30 can with 14x11 and the F32 can with 14x10 both small cup . Thank You. I could only get about 2800 at WOT. Have to take a wire brush, on a drill motor, to a prop and see what size. Also I want ...
- Mon Oct 31, 2016 4:19 pm
- Forum: Trojan Boats Forum
- Topic: Props
- Replies: 8
- Views: 5949
Props
I would like to know the correct size props for an F-31 1973 Trojan? Two 318 Chrysler 225 H.P. engines.
- Thu Dec 01, 2011 7:14 pm
- Forum: Trojan Boats Forum
- Topic: F32 rear fuel tank replacements
- Replies: 18
- Views: 13205
- Thu Dec 01, 2011 8:55 am
- Forum: Trojan Boats Forum
- Topic: F32 rear fuel tank replacements
- Replies: 18
- Views: 13205
- Wed Nov 30, 2011 6:31 pm
- Forum: Trojan Boats Forum
- Topic: 1974 f32 cracked windows
- Replies: 18
- Views: 11073
- Wed Nov 30, 2011 6:25 pm
- Forum: Trojan Boats Forum
- Topic: F31 and Restorations
- Replies: 7
- Views: 5084
- Wed Aug 18, 2010 8:19 am
- Forum: Trojan Boats Forum
- Topic: Water Pump Impeller Blues
- Replies: 46
- Views: 21824
Rebuilt my pumps several years ago but didn't replace the cams. Why they are called cams beats the hell out of me when they look like back to back forks. Anyway, port engine always ran a bit hotter. Last rebuild I replaced the cams, which on closer inspection, were well worn. Now port engine runs a ...
- Mon Jul 26, 2010 8:23 am
- Forum: Trojan Boats Forum
- Topic: interior wood finish from the factory?
- Replies: 11
- Views: 7480
Interior Wood Finish
I have the original factory manual for my 1973 F-31. Watco teak oil finish was used, on the interior, according to the manual. I refinished all the interior wood, using Watco, several years ago. Watco is available at Home Depot. Very easy to use and provides a beautiful flat finish on the teak. I di...
- Thu Jul 15, 2010 6:52 pm
- Forum: Trojan Boats Forum
- Topic: varnish vs oil
- Replies: 22
- Views: 11023
The teak inside my 73 F-31 was originally finished with Watco Teak Oil according to the original owners manual that I have. Watco can be purchased from home Depot. Directions say that it can be used outside as well as in. I refinished all the inside wood several years ago. About the easiest stuff in...
- Tue Jul 13, 2010 9:23 am
- Forum: Trojan Boats Forum
- Topic: Helm Seats
- Replies: 2
- Views: 2872
- Tue Jul 13, 2010 12:04 am
- Forum: Trojan Boats Forum
- Topic: Helm Seats
- Replies: 2
- Views: 2872
Helm Seats
Looking for a complete pair of lower helm seats, including frames, hardware, etc, for my F-31 1973 Trojan.
John
73 F-31 Trojan
John
73 F-31 Trojan
- Sun Oct 25, 2009 9:04 am
- Forum: Trojan Boats Forum
- Topic: winterizing- water pump question
- Replies: 7
- Views: 4754
- Mon Oct 05, 2009 10:55 am
- Forum: Trojan Boats Forum
- Topic: Season is over!
- Replies: 25
- Views: 12805
I heard on the radio, Saturday, this coming winter will be the coldest winter in ten years for the Northeast. Something about the weak El Nino in the Pacific will affect our weather in the Northeast. Anyway, I always pull my boat the first of November. Mild enough that I can get it covered up withou...