Trojan Boat Forum

She is a 1963 -1965 Martinique.

If you are interested we would have information on her. More if you had the Hull number.

Here is a link to a advertisement for her.

Bob
Beacon Marine
609 713 4602

https://www.trojanboats.net/zencart/ind ... cts_id=708

This question has been asked before about other large Trojans’s I asked John Leed ( former Trojan Engineer ) He gave a good answer that I have heard others use. A good rule for how many people on a cruise would be the number of places you have for people to sit if the weather goes bad. The number of...

Standard Practice Instructions #32
Also see: http://www.trojanboats.net/trojan-std-p ... -nuts.html

Hynautic Steering Blue Prints F-36

Here is the truth on Trojan International. 10 meter not cored 10 meter mid cabin not cored 10.8 meter not cored 11 meter cored 12 meter cored 13 meter cored 14 meter cored 15 meter only one made and it was cored. There were not any problems with the coring of the Internationals. Even today we never ...

Selling my f26 1979 , Has chevy 260 engine needs to be installed .cabin fully stripped and completely rebuilt with all brand new materials Have over 6k into it just need it gone . $2500 if gone before winter . located massena ny https://www.youtube.com/watch?v=uAsdam8rKXc Contact Bob at Beacon Marin...

Gauges like Delco, Datcon, Telaflex, and others the needle all will float back to the center or some wear else when the key is turned off. When the ignition key / switch is turned on all the gauges should come alive and present themselves correctly. Your 1977 Trojan F-32 came with Delco Gauges. If t...

There were two different ways the sliding cabinet doors worked. One had a kind of leaf spring on the top. On this setup you pushed up on the door and you then can move the bottom of the door out of the track. On the other one there were guides on the top of the door and the door and you need to remo...

The hull number 41-4415 is not a good hull number for for a 1963 36’ Sea Voyager 41 is not the model number for a 36’ Trojan 81 is the Model number for a 36’ Sea Voyager The fourth number 4 is the year which could be correct for 1964 The last three numbers 415 is the number of hulls build to date an...

With two very big pipe wrench’s

Note the fuel fill is 1 7/8” and new Plastic tank is 1 1/2” hose.

You need to remove fill and weld a reducer on the fill to bring it down to 1 1/2.

Note: you need to provide a new ground to the fuel fill.

Feel free to call
Beacon Marine
609 713 4602

This valve was on a F 36 1989. The captain has had overheating problems for years. The pictures were sent to us today. Groco SV valves were the most common valve Trojan used. The one in the picture is a 1250 1 1/4” which is a common size for gas engines Trojans. This was a superior valve because it ...

As of today we now have fiberglass wiper motor covers.
These are a direct replacement for the original plastic cover.
Fiberglass and gel coated white

https://www.trojanboats.net/zencart/ind ... ts_id=1112

After many months working with Trojans original Blue prints we have made a few of the Blue and Gold insignias. And the black size/name decals.


https://www.trojanboats.net/zencart/ind ... 62_163_169

We have the rebuild kit for the ram $78.12 plus USPS We also have the ball joint ends. Trojan part number was 21-334 for the ram. It does not appear that ram is available any more there is one the same size but does not mount the same. It could be tricky to make it fit. Bob Beacon Marine 609 713 4602

As of today 8/23/18 you no longer need to resize you photos before uploading them to the form.
It's now simple to attach photos to your forum posts... Enjoy.