Trojan Boat Forum

Has anyone ever replaced the cartridge in one of these? Mine is leaking when the cold water is on. A little less with the hot water on. https://www.chicagofaucetshoppe.com/Grohe-Ladylux-33-790-Pull-Out-Spray-Faucet-Parts-p/gro-33790.htm I can't figure out if I need a special tool to get this out. Is...

Project Done. Thanks to Mr. Pote for sending me his unused Trojan 10 Meter Logos. I had a local guy modify it to 12 Meter and install them on my boat. Since the artwork was hard to find, I asked him to scan them into his computer for future use. They don't make the pot metal logos anymore for 12M's ...

I spoke to Bob, I might have the one you're looking for NIB.
PM me.

Project Done. What I thought was a crack in the pipe was actually a saw blade cut from who knows when. I cut off about a foot of the 8 inch hose to inspect since I could only tell so much from the camera I put up the exhaust. Before I cut the hose I put a chain strap wrench on the ends to try and br...

I used Shields Marine Poly X Sanitation Hose in 2016 on my 12M Express. Absolutely no odor permeation at all. A bit tough to get on barbed fittings, but worth the fight. Only want to do this once. Shields Poly X is considered the ultimate sanitation hose. Easy to slip over most fittings, Poly X comb...

I really wanted to go with a vertical windlass but the more I research it just doesn't look possible. The 12M express pulpit is not flat unlike the convertibles. In order for a vertical windlass to work the unit must be level with the roller. From the pic of another 12M the windlass is mounted on a ...

Got the recored pulpit back from Raybo marine in Lindenhurst. Great looking job. It sits until April when I take the shrinkwrap off. Looking forward to boat show in nyc at Javits to pick a windlass. no sign of the foot switches or the old SeaWolf beast. If anyone needs a Seawolf let me know.

I love that site.
https://www.repairclinic.com/PartDetail ... 00/4469224
My dimensions on my bucket are 10w x 11.75d x 5.75h which matches this item from what I can tell on the 1 inch grid marks.
Tom C.

Pics of ice bucket

Some other pics. Dropped it off today to get recored. Noticed there is unprotected wood where 5 of the carriage bolts go. Lots of wood rot and dirt between the pulpit and decking. Deck is about 1-1/4 thick, pulpit is another 3-3/8 thick plus there is a small gap between the two, almost at 5 inches t...

Finally got it off the boat, two person job for sure. In the "inlay" section there looks to be this gray vinyl material that is glued down. The closest thing that I could find is a product called "Lonseal". It's gray with a bunch of round dots on it. It appears to be used for int...

Thanks for the pics.

I'm guessing the 1" starboard is there to cover up the blemishes of the old setup. I'm trying to understand why the Sea Wolf 520 was installed on the 4" block to begin with. Was is for decoration or for purpose? It seems like if your setup works fine with just a 1 inch lift a zero inch lif...