I am looking for 10 meter express or bridge shaft(s) and/or rudder(s)
Anyone have takeouts from a diesel conversion, etc. I want them as spares
Search found 90 matches
- Mon Jan 18, 2021 9:18 am
- Forum: Trojan Boats Forum
- Topic: WTB 10 meter express or bridge shafts, rudder
- Replies: 2
- Views: 2446
- Mon Jan 18, 2021 9:14 am
- Forum: Trojan Boats Forum
- Topic: 11 meter wet bar
- Replies: 3
- Views: 4584
Re: 11 meter wet bar
I have 2 wet bars from 10 meter express. Located in Great lakes, Michigan
- Mon Jan 11, 2021 11:28 am
- Forum: Trojan Boats Forum
- Topic: Why is Horn switch 12v- on 10mtr
- Replies: 3
- Views: 2317
Re: Why is Horn switch 12v- on 10mtr
It is wired into a relay type setup for the high water alarm. Trojan schematic even show it as 12v neg
- Mon Jan 11, 2021 5:17 am
- Forum: Trojan Boats Forum
- Topic: Why is Horn switch 12v- on 10mtr
- Replies: 3
- Views: 2317
Why is Horn switch 12v- on 10mtr
So in my dash rewire I get to the horn. The horn pushbutton has 12v negative to it....Any input as to why? I am going to wire it this way but just curious as to why
- Sun Jan 10, 2021 8:47 am
- Forum: Trojan Boats Forum
- Topic: 10 meter Express New Dash/Console Project
- Replies: 39
- Views: 21287
Re: 10 meter Express New Dash/Console Project
Well, ran into a stumbling block. Previous owner secured the old dash with 5200 and it is stuck down. Going to see if I can. get a wire to cut it. This is why I do not recommend 5200 for anything. 4200 has excellent adhesion properties and is removable. As far as I am concerned. the entire boat need...
- Thu Jan 07, 2021 8:23 am
- Forum: Trojan Boats Forum
- Topic: 10 meter Express New Dash/Console Project
- Replies: 39
- Views: 21287
Re: 10 meter Express New Dash/Console Project
So the plan is the back panel remains secured to the flat dash permanently with blocking along the bottom It is going to have the terminal barrier strips on the inside. The console itself will be screwed from the sides of it to blocking that is permanently attached to the flat dash area. Wiring from...
- Thu Jan 07, 2021 4:49 am
- Forum: Trojan Boats Forum
- Topic: 10 meter Express New Dash/Console Project
- Replies: 39
- Views: 21287
Re: 10 meter Express New Dash/Console Project
Test fit in boat. It will get pushed forward after I remove the old console. Ergonomically it provides the same view and is easily accessed from the helm chair
- Thu Jan 07, 2021 4:43 am
- Forum: Trojan Boats Forum
- Topic: 10 meter Express New Dash/Console Project
- Replies: 39
- Views: 21287
Re: 10 meter Express New Dash/Console Project
Back panel template , cut, and test fit
- Thu Jan 07, 2021 4:38 am
- Forum: Trojan Boats Forum
- Topic: 10 meter Express New Dash/Console Project
- Replies: 39
- Views: 21287
Re: 10 meter Express New Dash/Console Project
Vdo gauges after disassembly and drilling out red lenses and replacement with blue leds and blue led rocker switch panel including neat ignition start run switch. I am doing all of the wiring making custom harnesses as you can see. Heat shrink connectors, auto wire strippers, and ratcheting crimp to...
- Thu Jan 07, 2021 4:34 am
- Forum: Trojan Boats Forum
- Topic: 10 meter Express New Dash/Console Project
- Replies: 39
- Views: 21287
Re: 10 meter Express New Dash/Console Project
More layup photos
- Thu Jan 07, 2021 4:32 am
- Forum: Trojan Boats Forum
- Topic: 10 meter Express New Dash/Console Project
- Replies: 39
- Views: 21287
Re: 10 meter Express New Dash/Console Project
Here are pics of the donor console, cutting it, making the mold to widen it, layup , and removal from mold
- Fri Dec 25, 2020 3:56 pm
- Forum: Trojan Boats Forum
- Topic: 10 meter Express New Dash/Console Project
- Replies: 39
- Views: 21287
Re: 10 meter Express New Dash/Console Project
Well, I stumbled upon this donor console at the salvage yard and got a great deal on it. This will save a lot of work vs starting from scratch. My plan is to cut the top portion off to use for the dash. It is not wide enough, so I will stretch it by glassing in an 8 inch mid section. As you can see,...
- Fri Dec 11, 2020 4:50 pm
- Forum: Trojan Boats Forum
- Topic: 10 meter Express New Dash/Console Project
- Replies: 39
- Views: 21287
Re: 10 meter Express New Dash/Console Project
As it is sitting right now the shifter clears, My plan is to move that console forward about 3 more inches once the old one is Removed. I am also planning on removing the controls and replacing with the controls in this pic.
- Fri Dec 11, 2020 2:13 pm
- Forum: Trojan Boats Forum
- Topic: 10 meter Express New Dash/Console Project
- Replies: 39
- Views: 21287
10 meter Express New Dash/Console Project
My 10 meter has gone thru many updates, but the one thing that still sticks out is the Star Trek dash. Although functional for its time, it hinders modern electronic layouts. I have started my long anticipated upgrade. I had considered utilizing the original dash but it just won't. work out. The pla...
- Fri Dec 11, 2020 1:52 pm
- Forum: Trojan Boats Forum
- Topic: 10 meter hardtop project, radar arch removal
- Replies: 16
- Views: 8701
Re: 10 meter hardtop project, radar arch removal
Yes RWS. interior with teak veneer.