Search found 3027 matches
- Mon May 14, 2018 5:09 pm
- Forum: Trojan Boats Forum
- Topic: Drone video F32
- Replies: 3
- Views: 3517
Re: Drone video F32
Very nice! Thanks for posting it.
- Wed Apr 04, 2018 6:24 pm
- Forum: Trojan Boats Forum
- Topic: F32 sliding door lock
- Replies: 8
- Views: 5328
Re: F32 sliding door lock
To remove the door, you remove the Phillip screws along the bottom sill plate that the salon door rests on. (they go in horizontally) Once these screws, (may 5-6 of them) are removed, you tilt the door outwards with the framing from the bottom and remove. Takes less than 5 minutes... If I go down to...
- Wed Apr 04, 2018 10:42 am
- Forum: Trojan Boats Forum
- Topic: F32 sliding door lock
- Replies: 8
- Views: 5328
Re: F32 sliding door lock
What year F32. They changed the design on the latch mechanism...
- Mon Mar 19, 2018 9:09 am
- Forum: Trojan Boats Forum
- Topic: Register your VHF radios!
- Replies: 1
- Views: 2170
Re: Register your VHF radios!
Mine has been registered...
Timely of you to post this, being that many are close to the start of their boating season.
Timely of you to post this, being that many are close to the start of their boating season.
- Mon Nov 13, 2017 12:02 pm
- Forum: Trojan Boats Forum
- Topic: F32 fuel delivery question
- Replies: 2
- Views: 2767
Re: F32 fuel delivery question
With the 4 tank set-up, you always want to shut off the tanks which you are not drawing from. If you are drawing fuel from front tanks for example, say the port and starboard for their respective engines, you'd have the crossover valve closed along with the rear tanks. And vice-verse for when you're...
- Mon Oct 02, 2017 12:58 pm
- Forum: Trojan Boats Forum
- Topic: 10 Meter Repower
- Replies: 0
- Views: 11953
10 Meter Repower
This is an old article and I may have seen it posted here years ago. Nonetheless, an interesting read. Enjoy.
https://www.sbmar.com/repower-projects/ ... -10-meter/
https://www.sbmar.com/repower-projects/ ... -10-meter/
- Thu Aug 10, 2017 7:29 am
- Forum: Trojan Boats Forum
- Topic: Choosing new Carb for Chrysler M360
- Replies: 3
- Views: 2818
Re: Choosing new Carb for Chrysler M360
I too, replaced my Quadrajets with the 1409s a few years back. Should have done it years ago...
- Tue Aug 01, 2017 7:31 am
- Forum: Trojan Boats Forum
- Topic: Lunaire AC Recharge
- Replies: 6
- Views: 4207
Re: Lunaire AC Recharge
You cannot use automotive refrigerant in this system. Yours uses R22, which today, is extremely expensive. There will be a low side and high side port on the compressor. Unless you're familiar with properly checking and charging an AC system, see if you can find someone who's in the business to chec...
- Mon Jul 31, 2017 2:11 pm
- Forum: Trojan Boats Forum
- Topic: Crusair SMXir
- Replies: 1
- Views: 2207
Re: Crusair SMXir
The panels (key pad) go bad from time to time. I had to replace mine a few years ago.
- Mon Jul 10, 2017 9:32 am
- Forum: Trojan Boats Forum
- Topic: Phone # for John Leed
- Replies: 3
- Views: 2958
- Mon Jun 12, 2017 8:59 am
- Forum: Trojan Boats Forum
- Topic: Crusader Closed Cooling System
- Replies: 7
- Views: 5658
Re: Crusader Closed Cooling System
gitchisum wrote:I have seen other F-32's with big blocks, but they have been installed by owner. Did F-32's ever come with 454's from the factory?
A friends has a pair of 460 fords in his F-32. cruises nicely!
No, they did not come with big blocks. My brother's '77 has them in his 32.
- Tue Jun 06, 2017 5:53 pm
- Forum: Trojan Boats Forum
- Topic: Who built Trojans and your working Hull number.
- Replies: 10
- Views: 5473
Re: Who built Trojans and your working Hull number.
I had a disagreement with an F36 sedan owner who insisted that his hull was a Delta Conic, Harry Schoell design. (Hopefully he was NOT correct unless there is something I'm not aware of... ) as the International/Meter boats were. ;- ) Do You have a issue with my Bertram built Delta Conic hull F36 ?...
- Tue Jun 06, 2017 3:50 pm
- Forum: Trojan Boats Forum
- Topic: Who built Trojans and your working Hull number.
- Replies: 10
- Views: 5473
Re: Who built Trojans and your working Hull number.
I had a disagreement with an F36 sedan owner who insisted that his hull was a Delta Conic, Harry Schoell design. (Hopefully he was NOT correct unless there is something I'm not aware of... ) as the International/Meter boats were.
- Mon Jun 05, 2017 6:09 pm
- Forum: Trojan Boats Forum
- Topic: HEI Distributors
- Replies: 17
- Views: 12352
Re: HEI Distributors
The wire coming from the solenoid was for the ignition coil which provided the needed 12 volts while cranking. You won't need it...
- Mon Jun 05, 2017 5:09 pm
- Forum: Trojan Boats Forum
- Topic: Soft flybridgd floor
- Replies: 11
- Views: 9330
Re: Soft flybridgd floor
I searched their site, kinda hokey, I thought. Do the job right and get the rotted coring out and repair. You can search this forum or if you're on FB, there is a Trojan Boat Owners page. Bob Cushman here at Trojan Boats (Beacon) has a link to some good material to replace the balsa core. I have to ...