Search found 33 matches

by bssmnbll
Wed Jul 05, 2017 12:27 pm
Forum: Trojan Boats Forum
Topic: F-32 fresh water tanks
Replies: 11
Views: 6967

Re: F-32 fresh water tanks

does anyone know where to get a replacement fresh water tank for a 76 F32??
by bssmnbll
Wed Jul 05, 2017 12:20 pm
Forum: Trojan Boats Forum
Topic: F-32 fresh water tanks
Replies: 11
Views: 6967

Re: F-32 fresh water tanks

does anyone know where to get a replacement for the water tank on F32's. Mine only holds a little water, then starts filling the bilge. Guess taking it out will tell the story. Hell of a time right in middle of summer.
by bssmnbll
Wed Jul 05, 2017 12:12 pm
Forum: Trojan Boats Forum
Topic: F32 cutless bearings
Replies: 5
Views: 4801

Re: F32 cutless bearings

Fellows, if you have access to a Strut-Pro tool, and need to do cutless bearings or shaft removal, this tool makes life good and takes a load off the wallet. For what the repair yards get to do the job,it is a good purchase, and with a hand from my younger son, makes a two hour job out of the cutles...
by bssmnbll
Fri Jun 23, 2017 6:15 pm
Forum: Trojan Boats Forum
Topic: 1976 F32 sport fish
Replies: 1
Views: 1522

1976 F32 sport fish

I have a bent prop shaft, and wonder, does anyone know the length of the shaft and a good place to buy one??
by bssmnbll
Sat Jun 17, 2017 6:59 pm
Forum: Trojan Boats Forum
Topic: F32 cutless bearings
Replies: 5
Views: 4801

Re: F32 cutless bearings

Thanks for the quick reply. That confirms my very ruff measurement made on parts with years of use, and with the shafts in place. Now to get some first hand experience with this "super tool" said to be able to remove the bearing with the shaft in place, thus saving tonnes of labor hrs.
by bssmnbll
Sat Jun 17, 2017 6:20 pm
Forum: Trojan Boats Forum
Topic: New Cockpit Lights
Replies: 9
Views: 6992

Re: New Cockpit Lights

They look great and add a whole new level of light. What are they advertised as on Amazon??
by bssmnbll
Sat Jun 17, 2017 5:49 pm
Forum: Trojan Boats Forum
Topic: F32 cutless bearings
Replies: 5
Views: 4801

F32 cutless bearings

I had my 76 trojan pulled for routine bottom paint this month, and found my cutless bearing rubbers on the way out of the brass.
Does anyone know the measurement of these bearings?? And has anyone had any experience with the Strut-Pro tool for pulling said bearing??
by bssmnbll
Fri Apr 08, 2016 10:02 am
Forum: Trojan Boats Forum
Topic: 2016 Cheasapeke bay rendevouis Poll
Replies: 50
Views: 23487

Re: 2016 Cheasapeke bay rendevouis Poll

The good ship "Mi Yard" sails out of the Magothy River, and would be happy to meet the people of the Forum any place within 20 miles of Baltimore light.
by bssmnbll
Thu Aug 27, 2015 11:46 am
Forum: Trojan Boats Forum
Topic: 1973 Stalling After Running
Replies: 30
Views: 13101

Re: 1973 Stalling After Running

I just found this post about engines dying after a run. I have a 76 F32 with 360 Chryslers, have owned the boat for 21 years, and have had this problem from time to time. This year it is the port side. When the starboard engine did this a few years ago, I changed(after a lot of other things)the duel...
by bssmnbll
Mon Apr 27, 2015 4:30 pm
Forum: Trojan Boats Forum
Topic: F32 12V ground bar locations
Replies: 2
Views: 1755

Re: F32 12V ground bar locations

I, too, am working on my 12V system, trying to put a new fuse board in the main lower helm area, I have never seen a good schematic of an F32, so plan on spending some time with a continuity teste. As a former owner changed the main fuse board, I would like to see what the original looked like. Any ...
by bssmnbll
Fri Apr 10, 2015 4:54 pm
Forum: Trojan Boats Forum
Topic: LectraSan Waste system
Replies: 12
Views: 7628

Re: LectraSan Waste system

The wife is the photographer so will try to get her on it when I haul this year.
by bssmnbll
Mon Apr 06, 2015 11:18 pm
Forum: Trojan Boats Forum
Topic: My F32 Repower
Replies: 21
Views: 12156

Re: My F32 Repower

Jamie, I'm sure you shopped those engines thoroughly. Where did you end up buying them? My F32 in older that yours. 76' with 250 hp 360 chryslers, and they are getting tired, so I am looking around. I assume you are using the same velvet drive 1:52? I will also go with GM, but would like more hp, at...
by bssmnbll
Sun Mar 22, 2015 1:51 pm
Forum: Trojan Boats Forum
Topic: LectraSan Waste system
Replies: 12
Views: 7628

Re: LectraSan Waste system

I have had an Electrosan, since 1994, so is an old system which used a 2 gallon tank of mixed salt and water for consistent mix, rather than counting on everyone to throw correct amount into flush (Raritan electric head). After a friend bought a later system, with a digital metering system and tank ...
by bssmnbll
Wed Mar 11, 2015 11:29 am
Forum: Trojan Boats Forum
Topic: 1976 F32 Main fuse panel conversion
Replies: 8
Views: 3667

Re: 1976 F32 Main fuse panel conversion

Allen Sr., can you recall who makes the ATC board? that may be a better way to go, not need any more space, control corrosion, and ID problems
by bssmnbll
Tue Mar 10, 2015 2:49 pm
Forum: Trojan Boats Forum
Topic: 1976 F32 Main fuse panel conversion
Replies: 8
Views: 3667

1976 F32 Main fuse panel conversion

I want to convert the fuse board below the lower helm, with a breaker panel. Has anyone had experience with this? Can I combine circuits, like wipers, so I don't need so many breakers? Any ideas would be appreciated. Bill Nelson