Trojan Boat Forum

Hi Paul, I found mine on ebay R14x10 nibral with a cup looked brand new for a 100 bucks and some shipping the guy said it was off a trojan

the Q-jets are great carbs and designed for cars with the small tripple boost venteri primary circuts great for fuel mileage when cruising on the highway and large secondarys for passing or going up hills when needed, boats are always going up hill if you don't beleive me hook up a vacuum gauge and ...

f 26 moored at Tyee yacht club, boats name is " Early Bee"

welcome to the Trojan web , the f 26 is a great boat, good over all handling, and desent speed with modest power. the problems are fixable with modern marine sealers. the side windows leak around where the frame contacts the fiberglass just remove the frames clean and reseal same with the front wind...

single engine boats have the engine offset to the port side 1-2 inches to make them steer straight, if you look at your engine mounts the engine should be closer to the port stringer (righthand turning engine) also on the distributor depending on gear or chain drive cam and direction of the gear hel...

On my f 26 i deleted the metal frame altogeather and made new plexi windows that were the size of the outside diam. of the frame and used i think a boatlife silacon sealer made just for plexiglass the trick is to use plastic spacers about .080 between the fiberglass and the plexi because ther is som...

older mpi vortecs 2001 - 2010 use a mapped fuel sytem where the calibration is flashed, mapped or burned and cant be changed easily

vortec big advantages are in the heads with high flow ports and fast burn combustion chambers. you can use the vortec heads on an old block best used with flat top pistons and ends up at about 9.4:1 compression make sure you use an external bypass for the coolant because the older heads use a hole d...

that is where your table bed cushion get stored...... big project there i was there a year ago with the early bee also a f 26

i used 3M rubbing compound and a harbor freight buffer followed by wax after

what size water tanks are fitting under the decks on the 1975 f 26 boats and is any one using hot water tanks

picture update will be coming soon, i am pulling the engine Merc 233 to update the engine has any one tinkered with one of these. i'm thinking a cylinder head up date for starters like the edelbrock estreet 170 cc intake port 58cc cobustion chamber size, basicaly it's on par with a gm vortec w/fastb...

after one year of repair pics on photobucket http://s625.photobucket.com/albums/tt33 ... %20trojan/ i hope this works if not maybe some one can fix it !!!