Search found 12663 matches
- Tue Nov 07, 2023 9:13 pm
- Forum: Trojan Boats Forum
- Topic: 1988 10 Meter-mid cabin, Need new propellers!
- Replies: 11
- Views: 7498
Re: 1988 10 Meter-mid cabin, Need new propellers!
Check with Beacon Marine call Bob @ 609-713-4602.
- Wed Oct 25, 2023 10:25 am
- Forum: Trojan Boats Forum
- Topic: V struts for shaft size change
- Replies: 3
- Views: 12409
Re: V struts for shaft size change
They may call Bob @ 609-713-4602.
- Tue Oct 24, 2023 7:35 pm
- Forum: Trojan Boats Forum
- Topic: V struts for shaft size change
- Replies: 3
- Views: 12409
Re: V struts for shaft size change
You can go up to 1.5 with the stock struts. I don't think you can go any bigger on them. My engines put out 737 ftlbs torque using 1.5 shafts, But I have 1.53 reduction, not 1.75, Here is a company that can make the struts you need. You can also check with Beacon https://strutsruddersbearings.com/
- Tue Oct 17, 2023 11:42 pm
- Forum: Trojan Boats Forum
- Topic: Trojan F26
- Replies: 2
- Views: 7224
Re: Trojan F26
What year? There are 2 diffrent F26s. The early one is a v-drive (early 70s) The later inline. The 318 should have no problem getting either one on plane If it does have issues something is wrong. I don't think a 360 was offered by Trojan but not positive. A lot of room for a small boat. If I was lo...
- Sat Oct 14, 2023 11:45 pm
- Forum: Trojan Boats Forum
- Topic: Lateral Stringers
- Replies: 2
- Views: 7629
Re: Lateral Stringers
I would cut the top and see what you have. It can be done in or out of the water if it's blocked properly
- Wed Oct 04, 2023 10:48 am
- Forum: Trojan Boats Forum
- Topic: Deck repair option Injectadeck
- Replies: 6
- Views: 11173
Re: Deck repair option Injectadeck
Being a 2 parts the foam expands and cures quickly. I clean out the 3/16 hole and fill it with epoxy. Thanks for the info and answers on this product. I may try it on the future. I just done want to run into any lumps from the application as it expands and moves. There is a danger of that so you ne...
- Wed Oct 04, 2023 9:31 am
- Forum: Trojan Boats Forum
- Topic: 360 sputtering and stalling on rpm increase under load
- Replies: 2
- Views: 7518
Re: 360 sputtering and stalling on rpm increase under load
Check to make sure your timing and make sure you're getting full advance, Fuel pump pressure and volume ok?
- Wed Oct 04, 2023 9:20 am
- Forum: Trojan Boats Forum
- Topic: Help with packing seal on drive strut
- Replies: 5
- Views: 8375
- Wed Oct 04, 2023 9:18 am
- Forum: Trojan Boats Forum
- Topic: Help with packing seal on drive strut
- Replies: 5
- Views: 8375
- Wed Oct 04, 2023 9:12 am
- Forum: Trojan Boats Forum
- Topic: Deck repair option Injectadeck
- Replies: 6
- Views: 11173
Re: Deck repair option Injectadeck
Being a 2 parts the foam expands and cures quickly. I clean out the 3/16 hole and fill it with epoxy.
- Tue Oct 03, 2023 11:53 pm
- Forum: Trojan Boats Forum
- Topic: Deck repair option Injectadeck
- Replies: 6
- Views: 11173
Re: Deck repair option Injectadeck
Looking good. I’ve repaired sections of the bow deck by removing the top fg layer with a vibrating saw, replaced the punky balsa core with like material, epoxy coat the balsa, overcoat the balsa and replace the deck section, saving the nonskid pattern. Ran a thin bead of West epoxy in the saw lines...
- Sun Oct 01, 2023 8:49 am
- Forum: Trojan Boats Forum
- Topic: 10M Trojan International - installing a pulpit anchor windles
- Replies: 1
- Views: 2970
Re: 10M Trojan International - installing a pulpit anchor windles
This should help. Please note there are 6 different 10 meters so there maybe differences
viewtopic.php?p=110717&hilit=windlass#p110717
viewtopic.php?p=107982&hilit=windlass#p107982
You can do a search here and find more.
viewtopic.php?p=110717&hilit=windlass#p110717
viewtopic.php?p=107982&hilit=windlass#p107982
You can do a search here and find more.
- Thu Sep 28, 2023 9:44 am
- Forum: Trojan Boats Forum
- Topic: Trojan 390 leaking vent
- Replies: 1
- Views: 2726
Re: Trojan 390 leaking vent
Vent for? Fuel, holding tank, water tank or intake air? What year? Photo? Is it leaking inside or out side the hull?
- Tue Sep 26, 2023 8:43 pm
- Forum: Trojan Boats Forum
- Topic: Deck repair option Injectadeck
- Replies: 6
- Views: 11173
Deck repair option Injectadeck
Like many other older boats I found my Trojan suffering from soft bow disease. Did not look forward to cutting the top glass open, So I looked at different options. Living with it? Paying someone? After much research, I decided on "Injectadeck". Reviews were mixed, but found the negative o...
- Mon Sep 25, 2023 10:13 am
- Forum: Trojan Boats Forum
- Topic: Repowering with 4.3L V6?
- Replies: 16
- Views: 11328
Re: Repowering with 4.3L V6?
The OP did not do the repower. My thoughts I don't see why it would not work. Being fuel-injected you should see a slight gain in fuel economy. They may have to work harder to get on plane as maybe less tourqe. The main issue I see would be some vibration. The 4.3 is not as smooth as a V8 even the o...