Search found 197 matches
- Mon May 12, 2014 8:56 pm
- Forum: Trojan Boats Forum
- Topic: fuel tank replacement 1978 tri cabin
- Replies: 6
- Views: 3758
Re: fuel tank replacement 1978 tri cabin
I have a 73 Tri cabin. i had a process called Renu done on my port tank 5 years ago. Just google renu fuel tank repair. I plan to have the starboard tank done next winter. I'm sure there may be other solutions, that's the way I went since it was a reasonable price to get it done and I figured I didn...
- Sun Nov 10, 2013 3:02 pm
- Forum: Trojan Boats Forum
- Topic: oil leak
- Replies: 15
- Views: 5741
Re: oil leak
Great points.. To be honest I haven't done much of an inspection yet. The oil is dripping off the bottom of the oil pan and I can see that the front of the engine is dry. At first I thought the oil pan had a rust hole or the drain plug was leaking. I'll check it out more thuroughly the next time I'm...
- Sat Nov 09, 2013 8:11 am
- Forum: Trojan Boats Forum
- Topic: oil leak
- Replies: 15
- Views: 5741
Re: oil leak
Must be an oil leak epidemic. I cleaned and painted my bilge last winter and had no leaks until she was on the hard. I think the rear main seal on the port engine is leaking (velvet drive end). Has anyone ever had any success with engine additives to soften seals ? I am really reluctant to try that ...
- Sun Nov 03, 2013 6:09 pm
- Forum: Trojan Boats Forum
- Topic: Onan impeller
- Replies: 9
- Views: 3158
Re: Onan impeller
Well I bought an impeller off Amazon thinking I was buying a replacement and I received what looks like the Globe dry impeller. It has the plastic drive and it's blue. I think since the impeller is so much smaller than a marine engine impeller, the drive pin sees a lot less tongue and hopefully migh...
- Wed Oct 30, 2013 9:06 pm
- Forum: Trojan Boats Forum
- Topic: Onan impeller
- Replies: 9
- Views: 3158
Re: Onan impeller
Thanks guys, I'll check out the Trojan store. My pump bearings and seal seem to be good. I'd like to replace thee seal eventually if I can locate a seal kit for a reasonable price. We'll see.
Thanks again.
Thanks again.
- Tue Oct 29, 2013 8:38 pm
- Forum: Trojan Boats Forum
- Topic: Onan impeller
- Replies: 9
- Views: 3158
Re: Onan impeller
Wow! Thanks. Not going to use that one.
Any idea where to get a good impeller for an Onan gen?
Any idea where to get a good impeller for an Onan gen?
- Tue Oct 29, 2013 8:16 pm
- Forum: Trojan Boats Forum
- Topic: Onan impeller
- Replies: 9
- Views: 3158
Onan impeller
I'm looking for a replacement impeller for my MCCK Onan 6.5 gen. I see on Amazon.com there's an impeller called a dry run impeller by Globe Marine model 1014. The site says it's a direct replacement for the 131 0160 impeller, but improved to withstand running dry and only $33 bucks. Anyone out there...
- Mon Oct 07, 2013 9:18 pm
- Forum: Trojan Boats Forum
- Topic: Tri-cabin salon and aft cabin wall panel coverings
- Replies: 6
- Views: 3223
Re: Tri-cabin salon and aft cabin wall panel coverings
I have a 73 tri cabin and I agree with all the comments except I found I was able to peel off the covering on the sliding cupboard doors in the solan. The wood panels underneath look pretty good, so we left them natural.
- Sat Sep 21, 2013 5:07 pm
- Forum: Trojan Boats Forum
- Topic: Query to Aaron re v-drives
- Replies: 9
- Views: 3942
Re: Query to Aaron re v-drives
I also have a 73 Tri cabin with Walters v drives. A few years ago I had water in my v drive oil, so I had to pull the cover on the drive and repair the problem. There is non pump. Water flows from the movement of the hull. I recall a copper tube bent like an s in the water reservoir that the oil pas...
- Tue Sep 10, 2013 8:06 pm
- Forum: Trojan Boats Forum
- Topic: North Channel
- Replies: 7
- Views: 3992
Re: North Channel
Comodave, We are in slip 32 on mid shipment dr. In sager creek. stop by if you're around on the week ends. Where can an F32 float in Tuscan?
- Mon Sep 09, 2013 6:06 pm
- Forum: Trojan Boats Forum
- Topic: North Channel
- Replies: 7
- Views: 3992
Re: North Channel
Oh boy, lots of info to look at. I thank you both. I figured I can get A Sunday to Sunday off, but unfortunately not much more. Thanks for the invite ready123, but Georgian Bay is a little too far at least for this first big trip. I have lot's of info to go thru now and will let you know my travel p...
- Sun Sep 08, 2013 9:24 pm
- Forum: Trojan Boats Forum
- Topic: North Channel
- Replies: 7
- Views: 3992
North Channel
Over the last 4 years I have asked the forum for help on all kinds of technical items and it has been the best source of information ever for my 73 36 ft Tri cabin. You guys have helped me solve issues from deck epoxy to holding tank removal/replacement - thank you. The last item I was working on wa...
- Wed Aug 21, 2013 8:26 pm
- Forum: Trojan Boats Forum
- Topic: MCCK Generator
- Replies: 42
- Views: 15760
Re: MCCK Generator
Interesting about the auto start. I'm looking at the manual now and the water line connected to the 1" elbow out of the exhaust manifold must be the water injection you mention. The 1/4 inch plug I am referring to is on the top of the exhaust manifold. If you are looking down on the gen from th...
- Tue Aug 20, 2013 8:54 pm
- Forum: Trojan Boats Forum
- Topic: MCCK Generator
- Replies: 42
- Views: 15760
Re: MCCK Generator
Thanks guys, It is gas not diesel and it has a timer that automatically runs the blower for almost 10 minutes. It's pretty cool. After the blower runs for 10 the blower shuts off and the gen automatically starts. The first time we tried it we were surprised, when after 10 everything got quiet with t...
- Mon Aug 19, 2013 8:49 pm
- Forum: Trojan Boats Forum
- Topic: MCCK Generator
- Replies: 42
- Views: 15760
Re: MCCK Generator
I put the pump and carb back on with a new fuel filter on line and tried it. It actually started and purred like a kitten. Runs real quiet. I tried some lights and even turned on the Princess oven. The generator doesn't strain at all to run even the oven. It didn't immediately pump water, but it cam...