Search found 92 matches
- Tue May 08, 2012 6:22 pm
- Forum: Trojan Boats Forum
- Topic: Raw water pump installation
- Replies: 4
- Views: 2554
my pumps look simular to yours and can be used on either engine. they are marked on the back as far as which way is in and out of the pump according to rotation. they can be flipped to make either work on any rotation engine. try your best to get em rite and as long as you are feeding water into the...
- Mon May 07, 2012 6:36 pm
- Forum: Trojan Boats Forum
- Topic: F32 propellors
- Replies: 13
- Views: 4589
- Tue May 01, 2012 8:10 pm
- Forum: Trojan Boats Forum
- Topic: 39 express information requested
- Replies: 65
- Views: 18787
- Sun Apr 29, 2012 3:28 pm
- Forum: Trojan Boats Forum
- Topic: blower vent hose
- Replies: 12
- Views: 4979
- Sun Apr 29, 2012 11:38 am
- Forum: Trojan Boats Forum
- Topic: blower vent hose
- Replies: 12
- Views: 4979
blower vent hose
hi just checking if the vent hose to the blowers are just dryer vent hose or is there a marine app. for salt damage. ty
- Fri Apr 27, 2012 6:25 pm
- Forum: Trojan Boats Forum
- Topic: Getting close to install the engines.
- Replies: 3
- Views: 2100
- Sat Apr 07, 2012 9:27 pm
- Forum: Trojan Boats Forum
- Topic: how do you get these props off?
- Replies: 13
- Views: 3951
- Sat Apr 07, 2012 9:22 pm
- Forum: Trojan Boats Forum
- Topic: how do you get these props off?
- Replies: 13
- Views: 3951
- Sat Apr 07, 2012 9:18 pm
- Forum: Trojan Boats Forum
- Topic: how do you get these props off?
- Replies: 13
- Views: 3951
antlr- i just pulled mine wiyh a puller that resembled a C clamp- it hooks on the back of the hub and the front of the shaft that u removed the nuts from. after farting around for 2 hours or so and a stiff back i got it on rite.- after thinking it worked like a balancer puller and turning the thread...
- Wed Apr 04, 2012 7:44 pm
- Forum: Trojan Boats Forum
- Topic: halon system
- Replies: 12
- Views: 4084
- Tue Apr 03, 2012 7:51 pm
- Forum: Trojan Boats Forum
- Topic: halon system
- Replies: 12
- Views: 4084
halon system
could any one tell me procedure or where to start or type of company to call to have a halon syten checked out be sure its working and up to date.i didn t see any meter on it to say good or bad. should they be checked yearly and is it done on the boat or removed and brought for service ty
- Tue Apr 03, 2012 7:46 pm
- Forum: Trojan Boats Forum
- Topic: throttle body gaskets
- Replies: 4
- Views: 1424
throttle body gaskets
hello all - could anyone tell me if i can use regular automotive gaskets for throttle body to spacer and spacer to intake manifold or should i order up some from crusader. any differance for marine app. once again thank you
- Sat Mar 31, 2012 9:53 am
- Forum: Trojan Boats Forum
- Topic: run it like a trawler ????
- Replies: 45
- Views: 19307
kevin im thinking if your engines are tuned and running properly there should be no problem running at 1500 plus rpm. 1000 will barely be above idle. not sure but i think your year and engine type should be throttle body fuel injected. they look like carbs with spark arrestors on.i was told they are...
- Mon Mar 26, 2012 9:03 pm
- Forum: Trojan Boats Forum
- Topic: Stainless props
- Replies: 14
- Views: 2551
- Fri Mar 23, 2012 7:12 pm
- Forum: Trojan Boats Forum
- Topic: bilgecoat in engineroom
- Replies: 14
- Views: 4237