Trojan Boat Forum

Bolsters look great! I had the same idea about using the PVC. One question: how to you keep the vinyl from bunching up on the curved part of the board?

Mine is a 10.8 Sedan (bridge). Curious to how far you had to run the power from the amp to battery. Do most of you run the power for amp to the batteries?

Just curious if anyone has ever installed an amplifier on their trojan international ? If so, where did you mount the amplifier and how far was the run to the battery? With the boats having so many speakers (8) how did you handle that?

If the flange blower was still there would I be able to see it hanging in the corner or were they buried?

I do have the one line which pulls the vapors from the lowest point of ER....this is the line with the inline blower. The inline blower was actually installed backwards upon investigation. The blower was introducing air to the compartment instead of removing. I have turned the inline blower around w...

I have a 1989 10.8 meter and have a question about the original set up for the bilge blowers. I have been told that I should have some flange mounted blowers in the engine compartment in the corners near the side vents. I have looked several times and don't see any. It appears that I just have one i...

Quick question: I had to change the hose from my circulating pump to the heat exchanger so I though this might be a good time to change thermostat too. I have 1989 454 crusaders. I believe the thermostat I need is 160 but I am also curious if I need to order a gasket as well. Also, will I need some ...

I have a fly bridge. I see the grill in the shower And can follow it to the outside of the boat On the port side. It doesn't look like the small Screen on the exterior will come off easily. The duct is fairly small... Is it an inline blower? I just don't see access to get to anything. My Microwave i...

Just read my on post and realized it made no sense. I was hoping
Someone knew what size hose comes off the engine water pump and
Goes to the bottom of the heat exchanger? It looks like it is at
Least two inches in diameter. Thanks....

Need some help. I have two 454 crusaders in my 89 international
And it looks like it is time to change some engine hose. Are the
larger hoses coming off the water 2 inch diameter?

That sounds like a great fix but I can't even locate the old motor
So that I can hook the new inline blower up. Any ideas where to look?

1989 international: anyone know where I can locate shower
Exhaust can motor? It doesn't seem to work and I would
Like to fix it.

That is where I looked for the blower. All I can see are the hoses leaving the engine compartment. Can you actually see the blower from the engine compartment or do I need to remove something to see it? Are the air ducts on the starboard side for drawing air in?

RWS- Do you need to remove the grill to access the blower or can you get to it from the inside? Do you also have an inline blower for the gen? Im thinking this was added at some point.

Looking for a little help. I have a 1989 10.8 International and am trying to correct possible blower issues. We also had a boat explode at our marine about a week ago so this got me to start looking around my own engine room. I took a look and the only blower I see looks to be an inline blower which...