Trojan Boat Forum

For clarification the midship vents on F Boats were the exhaust vents and the aft vents are the intake vents. Thus, the aft vent openings face forward and the midship vent openings face aft. The vents look at each other. This was done because there is negative pressure midship which allows the mid s...

We have all the parts for the original Trojan Trim Tabs.
Always best to call for pricing or text or E mail.
Beacon Marine 609 713 4602

Trojan Boat Advertised Throughtout The Free World

Some Trojan History In 1969 Trojan Yachts become part of The Marine Group of Whittaker Corporation till Med 1985 when both Trojan and Bertram were sold. The Whittaker Marine Group 1. Bertram Yacht 2. Bertram Marine 3 Columbia Yachts 4. Coronado Yachts 5. Disco Marine 6. Meridian Yachts 7. Riva 8. Sa...

Trojan Patio Door Diagram

You should be able to have it rebuilt for under $1000
Rebuild kit is $195.00 and if needed reverse plates are $134.30 ( 3 bronze and two steel)

A new set of props will be far more then $1000.00

Would it not be more economical to just get the right trans.

1.91 is two to one.
Also it opposites input out put.

If you put the 1 1/2 to one as a replacement you will have both props turning the same way.

Would be a problem.

Questions call us

Bob
Beacon Marine
609 713 4602

Link to the owners manual

http://www.marinemechanic.com/books/man ... Manual.pdf

The information on these three pages is for both Onan 6.5 the old style with side draft carburetor, and new style with down draft carburetor.

Note we now have the Impellors instock for both Onan MCCK


https://www.trojanboats.net/zencart/ind ... &cPath=167

Sorry to hear they totaled her.

We can help you sell the parts you have for her.

https://www.trojanboats.net/zencart/ind ... cts_id=622

Feel free to give us a call.
609 713 4602

If you need wiring diagrams for your F-25 you should get the Owners Manual it comes with the original invoice and around 100 pages of information on each system of the boat. As well as the AC and DC electrical drawings. Electrical drawings are keyed to the hull number. If you give us your hull numbe...

If you need any help with this please feel free to
give us a call my partner John Leeds was one of the Trojan Engineers on the 10 meter.

Bob
Beacon Marine
609 713 4602

454 Crusader gas
Original prop was a 4 blade no cup 24 x27
Trans 2.9 to 1

Here are some pictures and information on the installation of two Moeller 58 gal fuel tanks installed in a 1977 F-32 model 321. Fuel Tanks are made of Polythylene There tanks replaced the aft original galvanized round tanks. Tanks are 44” long by 21.50” wide by 18.75” high We have some good pricing ...