Search found 269 matches
- Sun Jun 06, 2021 5:34 am
- Forum: Trojan Boats Forum
- Topic: inclinometer - correct way to measure running angle?
- Replies: 21
- Views: 13173
Re: inclinometer - correct way to measure running angle?
Trim Tabs Trojan Trojan trim tabs were primarily for transverse stability. ( port and starboard balance) On Trojan F boats optimal planing is at 4 degrees from bottom water surface. (Bow up ) On Trojan Internationals planing is 5 1/2 degrees (runs up hill) On smaller F boats F-25 and F-26 (single sc...
- Mon Apr 19, 2021 10:38 am
- Forum: Trojan Boats Forum
- Topic: F-29
- Replies: 0
- Views: 61496
F-29
THE F-29 SPORTSMAN 290/ SPORTCRUISER 292 " Have you Ever Seen One? " Only 14 were ever made. One was made in 1980 and 13 in 1981 Model 290 /292 There were two types of the F-29 available one called a Sportcruiser Model 292 which had bulkhead aft a hard top with flybridge. The other had F-2...
- Sun Apr 18, 2021 5:53 pm
- Forum: Trojan Boats Forum
- Topic: Tri Cabin / Tri Flybridge
- Replies: 0
- Views: 61292
Tri Cabin / Tri Flybridge
TriCabin /Trifly History The Tri Cabin was made in Canada at the Trojan facility of Shepherd Boats. She started out as a 36’ Sea Raider Tri-Cabin which was a fiberglass hull, teak forward deck, side decks, aft deck and deck hatches. The cabin top was wood covered fiberglass. The engines were located...
- Sat Apr 17, 2021 6:10 am
- Forum: Trojan Boats Forum
- Topic: LM 318 Raw Water Cooling System with Sherwood D65
- Replies: 5
- Views: 4197
Re: LM 318 Raw Water Cooling System with Sherwood D65
You may need to fill the bypass hose with water in order to get to get that side of pump to start working once pump is installed.
If you have other questions fell free to call.
609 713 4602
Bob
Beacon Marine
If you have other questions fell free to call.
609 713 4602
Bob
Beacon Marine
- Fri Apr 16, 2021 9:09 pm
- Forum: Trojan Boats Forum
- Topic: LM 318 Raw Water Cooling System with Sherwood D65
- Replies: 5
- Views: 4197
Re: LM 318 Raw Water Cooling System with Sherwood D65
I think I could help you better if you gave us a call. On a inboard with straight drive configuration were the port is LH and starboard is RH. LH and RH engine rotation is from looking at flywheel from drive facing forward. The cam bolts on the D60 Sherwood pump face toward the out side of the boat ...
- Sun Apr 11, 2021 7:09 am
- Forum: Trojan Boats Forum
- Topic: F32: water tank location
- Replies: 3
- Views: 2581
Re: F32: water tank location
The F-32 water tank is in the aft between the two fuel tanks.
If it has been changed just follow the water fill. Generally the water fill hose goes directly to the fresh water tank.
The F-32 had a 40 gal fresh water tank.
If it has been changed just follow the water fill. Generally the water fill hose goes directly to the fresh water tank.
The F-32 had a 40 gal fresh water tank.
- Fri Apr 09, 2021 5:52 am
- Forum: Trojan Boats Forum
- Topic: F32 Rudder support beam replacement
- Replies: 5
- Views: 3561
Re: F32 Rudder support beam replacement
You need to put it back the same way so safety collars roll pin will fit into same hole. Rudder port is the lower bearing. The top of the rudder should be 1/8 “ or less before the end of the rudder port.
- Fri Apr 09, 2021 5:41 am
- Forum: Trojan Boats Forum
- Topic: Performance numbers International & F Boats 1989
- Replies: 1
- Views: 2204
Performance numbers International & F Boats 1989
1989 Model Year International and Classic F-Boats
321 F-32
365 TriCabin
460 F-36
290 -F-29
330 10 meter
340 10 meter mid cabin
341 10 meter sadan
361 10.8 meter Convertable
370 11 meter
401 12 meter Convertable
402 12 meter MY
430 13 meter express
471 14 meter
400 12 meter express
321 F-32
365 TriCabin
460 F-36
290 -F-29
330 10 meter
340 10 meter mid cabin
341 10 meter sadan
361 10.8 meter Convertable
370 11 meter
401 12 meter Convertable
402 12 meter MY
430 13 meter express
471 14 meter
400 12 meter express
- Tue Mar 30, 2021 6:13 am
- Forum: Trojan Boats Forum
- Topic: Trim Tabs Trojan
- Replies: 6
- Views: 7164
Trim Tabs Trojan
Trojan trim tabs were primarily for transverse stability. ( port and starboard balance) On Trojan F boats optimal planing is at 4 degrees from bottom water surface. (Bow up ) On Trojan Internationals planing is 5 1/2 degrees (runs up hill) On smaller F boats F-25 and F-26 (single screw) slow spreed ...
- Sat Feb 06, 2021 2:42 pm
- Forum: Trojan Boats Forum
- Topic: Need help telling what motor
- Replies: 3
- Views: 2540
Re: Need help telling what motor
Post a picture and we can ID which motors you have.
- Fri Jan 15, 2021 1:20 pm
- Forum: Trojan Boats Forum
- Topic: U-boat 13 Meter
- Replies: 7
- Views: 4285
Re: U-boat 13 Meter
Prowersfish is correct. If the hull was not damaged then there is no way for the water to get into the coring.
Other questions feel free to call
Bob
Beacon Marine
609 713 4602
Other questions feel free to call
Bob
Beacon Marine
609 713 4602
- Fri Jan 15, 2021 7:44 am
- Forum: Trojan Boats Forum
- Topic: Trojan encapsulated stringers.
- Replies: 0
- Views: 61562
Trojan encapsulated stringers.
Here is a picture of a encapsulated fir stinger on a F-32 All Trojan F-Boats, Trojan Internationals have encapsulated stringers. Except the 5 different 10 meter International models the International 9 meter express and Trojan American which do not have encapsulated stringers and are a liner boat co...
- Tue Dec 08, 2020 7:52 am
- Forum: Trojan Boats Forum
- Topic: The difference between a express, sedan and the sportfisher in the F series”
- Replies: 0
- Views: 62460
The difference between a express, sedan and the sportfisher in the F series”
Let’s use an F-32 as a example: -- The F-32 "Express" Model 320 had a smaller fly-bridge larger cabin, the engines were shoved back to give more cabin space, taffrail and no patio door. -- The F-32 Sedan model 321 had a patio door and smaller cock pit, larger salon and a taffrail around th...
- Tue Nov 10, 2020 3:23 pm
- Forum: Trojan Boats Forum
- Topic: Chrysler starter
- Replies: 0
- Views: 61189
Chrysler starter
If the starter bendix get stuck in the fully extended position.
Here is what to do.
Here is what to do.
- Wed Nov 04, 2020 6:32 pm
- Forum: Trojan Boats Forum
- Topic: dripless shaft seals
- Replies: 4
- Views: 3622
Re: dripless shaft seals
It should be noted that in most every Trojan Model the shaft seal hard hose acts as a intermediate bearing.
If asked we never recommend replacing the shaft seal with any type of dripless packing that has a flexible hose.
If asked we never recommend replacing the shaft seal with any type of dripless packing that has a flexible hose.