Trojan Boat Forum

The pics with the beam through the window is from last year when we pulled the motors, they just fit through through the door with taking out the spark plugs I had planned to cut out the rot sections, which turn out to be most of it . I plan to glass the whole thing in. Will try to restore the origi...

http://s34.photobucket.com/user/Mark_Lojewski/library/

Started to re do my back deck today, I knew it needed some work but didn`t think it was as bad as it was

I would like to add a third fuel take in the tri cabin. I am looking for some type of diagram of how to make this work with the valve etc. I currently have 2 tanks each one is independent to each engine. Any help would be great

Hauled out today, all winterized and ready for winter. The following is my winter repair WISH list. - get V drives and transmissions rebuilt. - Drain bad fuel from fuel takes and clean out fuel system - rebuild carbs - replace chain drive steering with hydraulic - repair trim tabs to good work condi...

I will check that out, I find it strange that it is both engines thou. The tanks are not bridged .

Was out today, putts around for about 45 minutes, everything seemed to be running ok then I lost the one engine. No big deal it fired right back up but then both motors started running a bit rough. After a few minutes of this things seemed to get better, went to speed up made it to 2000 rpm and she ...

We decided to take the boat out of town this weekend and got a slip at a marina there for the night. We come in around 6 pm 25 knot winds, I pulled up to our assigned slip and pulled in turning to port I was half way in the slip and the wind start pushing the back end out so I went reverse starboard...

I really was not planning to get into the bathroom this year but one thing has lead to another. the base of the shower needs to be replaced and is a odd size 25x29, I am wondering my options to replace or to make one.

I have a smaller 20 foot boat that has tabs and I use them all the time. When I first got this trojan someone not sure who it was had told me that the tabs where a after market item and that you dont need them on a boat this size, so I think that stuck in my head so I never really worried about them...

Sounds like I need to address my non working trim tabs as well

Boat has been running great everything seems in check but I have developed a issue with the steering and would like to fix it. Everything is good at the lower speeds, but as soon as I hit 3000 rpm`s and hit any kind of wake the boat / steering is all over the place, very loose and it takes alot of o...

Well since I have got my engines all dialed in and running great, I guess its time to move on to the generator. It seems to have a mind of its own, it does start when a load is applied, I can sometimes get it to start after flipping the on and off switch or the generator to shore power switch severa...

Thanks some things I had not considered but will now. I finally just got up and running this weekend with the new engines and it looks like my fuel tanks are ok after all it was a different issue but its resolved now. I was going through my safety equipment and I have the required equipment but it j...

Hello Everyone,

I was going through the required emergency equipment list today that is required by law and I was just looking for some input on what other items people consider as must haves on the boats. Maybe there are even a few lists some people might have of what they carry .

I had 2 newer ( less then 400 hrs ) installed over the winter 270 crusaders they run perfect at idle and out of the marina but as soon as we are running for a bit and bouncing around some the one motor starts to back fire then will start stalling. So they are figuring that there is crap in the botto...