Search found 269 matches
- Sat Feb 10, 2018 11:31 am
- Forum: Trojan Boats Forum
- Topic: 1974 F32 110V Breakers
- Replies: 5
- Views: 3507
Re: 1974 F32 110V Breakers
Breakers are should be right to left or left to right. 1.Stove 2.Water heater 3. Starboard outlets 4. Port outlets We have the electrical drawing for your F-32 just give us a call. 609 713 4602 Note: Trojan electrical drawing are specific to a Trojan Boats hull number. Depending on what X package we...
- Sat Feb 10, 2018 11:13 am
- Forum: Trojan Boats Forum
- Topic: 36 Tri cabin Battery Charger
- Replies: 31
- Views: 17327
Re: 36 Tri cabin Battery Charger
It is intentional that the generator battery is not connected to the battery charger. The reason the battery charger is not connected to the generator battery is because Trojan wanted the generator to be isolated. So there was no way a failed battery charger could discharge the generator battery. Ma...
- Sat Feb 10, 2018 10:44 am
- Forum: Trojan Boats Forum
- Topic: problem spots on 1974 tri cabin
- Replies: 7
- Views: 4229
Re: problem spots on 1974 tri cabin
Here are two pages from the 1974 Catalog.
If you buy her we have the owners manual.
If you buy her we have the owners manual.
- Sat Feb 10, 2018 10:32 am
- Forum: Trojan Boats Forum
- Topic: Insta Trim / Boat leveler parts
- Replies: 14
- Views: 12161
Re: Insta Trim / Boat leveler parts
If you E mail us at Trojanboatsnet@aol.com we can E mail you a Video taken a few months ago of a F-32 321 on plane at 3800 RPM’s It is a impressive video of a 321 running stock props 16 x 15 super cup NI with Crusader 350’s
- Sat Feb 10, 2018 9:57 am
- Forum: Trojan Boats Forum
- Topic: 1989 12 Meter MY 6-71's
- Replies: 3
- Views: 2115
Re: 1989 12 Meter MY 6-71's
Infront of the door to head/shower pull carpet back and there is a floor panel remove it and the pump should be visible. You may need to unscrew the panel.
(Under floor near water tank center)
(Under floor near water tank center)
- Sat Feb 10, 2018 9:48 am
- Forum: Trojan Boats Forum
- Topic: Insta Trim / Boat leveler parts
- Replies: 14
- Views: 12161
Re: Insta Trim / Boat leveler parts
Beacon Marine sells all the Boat Leveler / Instatrim parts
as well as any part for any Trojan. Our prices would match what you would pay buying direct from Instatrim.
Beacon Marine
609 713 4602
Trojanboats.net
as well as any part for any Trojan. Our prices would match what you would pay buying direct from Instatrim.
Beacon Marine
609 713 4602
Trojanboats.net
- Sat Jan 27, 2018 5:12 pm
- Forum: Trojan Boats Forum
- Topic: The box by exhaust: Internationals with 671’s
- Replies: 3
- Views: 2750
The box by exhaust: Internationals with 671’s
Ever wonder what the box was for by the exhaust on Trojan Internations with 671’s ? Johnson & Towers made Trojan add the box to a lot of the Internationals. 10.8, 11, 13, 14 They did this because another boat not a Trojan had a engine blow up because water got into engine through exhaust port. T...
- Sat Jan 20, 2018 2:25 pm
- Forum: Trojan Boats Forum
- Topic: Autopilot for Trojan Chain Drive Steering.
- Replies: 1
- Views: 1915
Autopilot for Trojan Chain Drive Steering.
Autopilot for Chain drive steering with Saginaw gear. We were ask to find a Autopilot for a owner of a Trojan F-32 model 320 with chain drive steering. After talking to a dozen company’s here is the best option we have found for a chain drive ( non hydraulic Steering) We found that the best option i...
- Sat Jan 20, 2018 1:55 pm
- Forum: Trojan Boats Forum
- Topic: Borg Warner, Velvet Drive ( How to check oil level)
- Replies: 5
- Views: 8489
Borg Warner, Velvet Drive ( How to check oil level)
We regularly get ask how to check the oil level in the Trojan with a Velvet Drive. How to check fluid leave in your BW trans. "Let the trans/ engine get to operating temp, then have someone ready by the dipstick, shut the motor down, and have that person immediately pull the dipstick clean it t...
- Fri Jan 19, 2018 2:16 pm
- Forum: Trojan Boats Forum
- Topic: Soft flybridgd floor
- Replies: 11
- Views: 9503
Re: Soft flybridgd floor
Note: Balsa core and foam board core material is generally in 1” squares or rectangles and available in standard sizes 1/2” 3/4” and 1”. The thickness of the product you use for coring is important. Generally on soft spot repairs the top piece of 1/4” fiberglass decking is removed and new core mater...
- Thu Jan 18, 2018 8:33 pm
- Forum: Trojan Boats Forum
- Topic: Soft flybridgd floor
- Replies: 11
- Views: 9503
Re: Soft flybridgd floor
There is also
Airex Boat Structural PVC Foam C70.75 | C70 42 x 24 x 1/2 Inch Green
About $50 for 2’ x 4’
This is 1” squares like the balsa core.
We have used this when replacing the balsa core in a soft spot on a hull ( not a Trojan)
Airex Boat Structural PVC Foam C70.75 | C70 42 x 24 x 1/2 Inch Green
About $50 for 2’ x 4’
This is 1” squares like the balsa core.
We have used this when replacing the balsa core in a soft spot on a hull ( not a Trojan)
- Thu Jan 18, 2018 8:15 pm
- Forum: Trojan Boats Forum
- Topic: Soft flybridgd floor
- Replies: 11
- Views: 9503
Re: Soft flybridgd floor
We would use a micro filler to make the resin into a glue or paste. You Do Not want to fill the Tricel with resin. Then we would glue the Tricel to the bottom sheet of fiberglass and the top sheet of fiberglass. This is very basic instructions. Please feel free to call us Bob Beacon Marine Trojanboa...
- Thu Jan 18, 2018 4:28 pm
- Forum: Trojan Boats Forum
- Topic: Soft flybridgd floor
- Replies: 11
- Views: 9503
Re: Soft flybridgd floor
Photos of Tricel
- Thu Jan 18, 2018 4:23 pm
- Forum: Trojan Boats Forum
- Topic: Soft flybridgd floor
- Replies: 11
- Views: 9503
Re: Soft flybridgd floor
Here is a good number for the Tricel board
Vacuum Systems Co.
207 725 0935
Pricing 2’ x 4’ sheet
1/2 $13.30
3/4 $18.66
1” $22.50
Vacuum Systems Co.
207 725 0935
Pricing 2’ x 4’ sheet
1/2 $13.30
3/4 $18.66
1” $22.50
- Thu Dec 28, 2017 3:07 pm
- Forum: Trojan Boats Forum
- Topic: F-32 Performance Curves
- Replies: 16
- Views: 11503
Re: F-32 Performance Curves
Yes you are correct MPH
Good to have conformation of this old data.
Thank you
Good to have conformation of this old data.
Thank you