Trojan Boat Forum

I replaced mine with 30x12 last year. I bought the kits but used the boat leveler actuators as rerouting the hydraulic line would be a tremendous chore on one side. They worked well but I did shear the Non metalic pins on both actuators. I replaced with stainless steel pins and all has been well. 30...

I have ordered a lot of wire from them and it has all been top notch. I have installed two separate inverter\chargers and had them make up all of the battery cables and battery to inverter cables. They did an excellent job at a great price. I had 0000 wiring so crimping\soldering it myself wasn't an...

I'm back. I haven't been looking much lately. trying to check in more. on a plus note, i bought an old 16' Boston Whaler to add to the fleet

If anyone knows where to get one, I have been looking for years

Thanks, I need to get some as well.

My 1986 MC lists to Starboard as well, at least 2 inches

Most are 15 amps, but to be honest, as long as you match the load with the wiring size (and wiring length) to the breaker then you are fine.

That looks really nice. I am going with all white on the cusions. I found a different canvas guy to recover the helm chairs which saved some $. I will be going White\Lt.Grey\White on the coamings. I'm also replacing the vinyl under the radar arch with white. Teh white is actually slightly off white ...

If it's strataglass, you can use pure Collinite carnuba wax. Thats what was originally recommended before they started make "just for strataglasss" products. I use it in all my vinyl and it keep s it clean and flexible.

Here is a picture of the front coaming box that I removed. You can see the damage it incurred due to the sealant that was used. I wish they woudl have used 3M 4000 as that is removable. I'm not sure if this could be repaired somehow or if anyone knows of a 10 meter that is being parted out. I did fi...

I called them today. Their site had just crashed and they didn't know why. I called the guy in Chicago about the wetbar. he is going to get a shipping quote. It may not be too bad as it would go as freight. Now I just need to be sure I want to go that direction.

RWS, I don't have the high sats with footrests like you do. I am keeping the nice fiberglass boxes and just replacing the seats on top. I can get new seats that are very similar to the existing ones plus have a flip up bolster for $600 apiece. They make them custom and I can add color accents if I w...

Thanks guys, I may go with the wood blocks to raise the height a bit.

Hi all,

Has anyone replaced the rubber feet on the bottom of the L-Benches? Mine are shot and I would like to replace them.

Scott

Todd, for the $6600 hard top, was that accomplished by removing the arch entirely or using the arch as part of the top? We would also like a hard top (In 4 years I have never run the boat with the top down other than haul out and in) I was figuring $10K for a hard top, $6600 sounds better as long as...