Trojan Boat Forum

The "headlights" is taken away, due to preparation for paint. The same is done with the stainless steel inserts in the rubber fender list.

https://www1.picturepush.com/photo/a/15614829/640/Trojan/20170113-123242.jpg https://www1.picturepush.com/photo/a/15614828/640/Trojan/20170113-123225.jpg https://www1.picturepush.com/photo/a/15614827/640/Trojan/20170113-123217.jpg I have also done the same with the bow. It was pretty soft, and was ...

I have made some work on the Trojan. Like repairing the hatches. They were all destroyed from water and blistering. I cleaned all hatches, grinded them, and glued in divinycell. Here is a picture taken half hour after the glueing. https://www1.picturepush.com/photo/a/15614830/640/Trojan/20170113-123...

First of all: HAPPY NEW YEAR!!! Here is, a little off topic, a nice picture of my aircraft. It was taken by a skier high up in the mountain, just outside the meteorological station in Juvasstind in Norway. We have a tradition to drop a package with newspaper, a bottle of whiskey and a box of chocola...

Yes RWS! I have read about the problems with platforms and possible drag behind the boat. In this case I will "lift" the platform up about 5 inches higher than original, and at the same time make it longer. Maybe I will try to lift it more than 5 inches (6-7) just to prevent the drag, not ...

The corners was not damaged, nor cracked. I guess pre owner must been nervous about docking. And yes, I am having great fun working on the boat. But on the oposite side my wife hate the boat. Funny..... Last summer she begged for a ride, now it is only a rotten hull for putting money into. I guess s...

No Dave! It was reinforced when I got the boat. I have removed the plates from the corners. But I can´t understand why the owner have put them on, unless he was a bad boater which used to collide with the docks around, or maybe used to drive in heavy ice conditions...

I have received more than 3 tons teak wood planks (8" x 3" x 4 meter), and we will make a big, nice and stable swimplatform. Gonna make it 4 ft. long. We will also do the aft deck in teak plank, as well in the saloon.

We need a newer instrument panel. Any suggestion out there?

Hydraulic reservoir just hanging in there....

Now it´s time for a good cleaning in the tankroom.

We will seal all the trough hull holes, even the holes in sides.

Reinforced corners aft.