Search found 12645 matches

by prowlersfish
Tue Oct 17, 2023 11:42 pm
Forum: Trojan Boats Forum
Topic: Trojan F26
Replies: 2
Views: 6174

Re: Trojan F26

What year? There are 2 diffrent F26s. The early one is a v-drive (early 70s) The later inline. The 318 should have no problem getting either one on plane If it does have issues something is wrong. I don't think a 360 was offered by Trojan but not positive. A lot of room for a small boat. If I was lo...
by prowlersfish
Sat Oct 14, 2023 11:45 pm
Forum: Trojan Boats Forum
Topic: Lateral Stringers
Replies: 2
Views: 6599

Re: Lateral Stringers

I would cut the top and see what you have. It can be done in or out of the water if it's blocked properly
by prowlersfish
Wed Oct 04, 2023 10:48 am
Forum: Trojan Boats Forum
Topic: Deck repair option Injectadeck
Replies: 6
Views: 9833

Re: Deck repair option Injectadeck

Being a 2 parts the foam expands and cures quickly. I clean out the 3/16 hole and fill it with epoxy. Thanks for the info and answers on this product. I may try it on the future. I just done want to run into any lumps from the application as it expands and moves. There is a danger of that so you ne...
by prowlersfish
Wed Oct 04, 2023 9:31 am
Forum: Trojan Boats Forum
Topic: 360 sputtering and stalling on rpm increase under load
Replies: 2
Views: 6479

Re: 360 sputtering and stalling on rpm increase under load

Check to make sure your timing and make sure you're getting full advance, Fuel pump pressure and volume ok?
by prowlersfish
Wed Oct 04, 2023 9:20 am
Forum: Trojan Boats Forum
Topic: Help with packing seal on drive strut
Replies: 5
Views: 7776

Re: Help with packing seal on drive strut

P-Dogg wrote: Wed Oct 04, 2023 7:15 am What's the advantage of removing the strut too?
Much easier to remove the bearing and press a new one in.
by prowlersfish
Wed Oct 04, 2023 9:18 am
Forum: Trojan Boats Forum
Topic: Help with packing seal on drive strut
Replies: 5
Views: 7776

Re: Help with packing seal on drive strut

P-Dogg wrote: Wed Oct 04, 2023 7:15 am What's the advantage of removing the strut too?
Much easier to remove the bearing and press a new one in.
by prowlersfish
Wed Oct 04, 2023 9:12 am
Forum: Trojan Boats Forum
Topic: Deck repair option Injectadeck
Replies: 6
Views: 9833

Re: Deck repair option Injectadeck

Being a 2 parts the foam expands and cures quickly. I clean out the 3/16 hole and fill it with epoxy.
by prowlersfish
Tue Oct 03, 2023 11:53 pm
Forum: Trojan Boats Forum
Topic: Deck repair option Injectadeck
Replies: 6
Views: 9833

Re: Deck repair option Injectadeck

Looking good. I’ve repaired sections of the bow deck by removing the top fg layer with a vibrating saw, replaced the punky balsa core with like material, epoxy coat the balsa, overcoat the balsa and replace the deck section, saving the nonskid pattern. Ran a thin bead of West epoxy in the saw lines...
by prowlersfish
Sun Oct 01, 2023 8:49 am
Forum: Trojan Boats Forum
Topic: 10M Trojan International - installing a pulpit anchor windles
Replies: 1
Views: 2754

Re: 10M Trojan International - installing a pulpit anchor windles

This should help. Please note there are 6 different 10 meters so there maybe differences


viewtopic.php?p=110717&hilit=windlass#p110717

viewtopic.php?p=107982&hilit=windlass#p107982


You can do a search here and find more.
by prowlersfish
Thu Sep 28, 2023 9:44 am
Forum: Trojan Boats Forum
Topic: Trojan 390 leaking vent
Replies: 1
Views: 2519

Re: Trojan 390 leaking vent

Vent for? Fuel, holding tank, water tank or intake air? What year? Photo? Is it leaking inside or out side the hull?
by prowlersfish
Tue Sep 26, 2023 8:43 pm
Forum: Trojan Boats Forum
Topic: Deck repair option Injectadeck
Replies: 6
Views: 9833

Deck repair option Injectadeck

Like many other older boats I found my Trojan suffering from soft bow disease. Did not look forward to cutting the top glass open, So I looked at different options. Living with it? Paying someone? After much research, I decided on "Injectadeck". Reviews were mixed, but found the negative o...
by prowlersfish
Mon Sep 25, 2023 10:13 am
Forum: Trojan Boats Forum
Topic: Repowering with 4.3L V6?
Replies: 16
Views: 10925

Re: Repowering with 4.3L V6?

The OP did not do the repower. My thoughts I don't see why it would not work. Being fuel-injected you should see a slight gain in fuel economy. They may have to work harder to get on plane as maybe less tourqe. The main issue I see would be some vibration. The 4.3 is not as smooth as a V8 even the o...
by prowlersfish
Mon Sep 25, 2023 7:27 am
Forum: Trojan Boats Forum
Topic: 89 mid cabin paralleling solenoid
Replies: 6
Views: 3947

Re: 89 mid cabin paralleling solenoid

Yes it's possible. If stayed engaged it would draw more than the altnator could put out. Was it burned up?
by prowlersfish
Fri Sep 15, 2023 8:37 am
Forum: Trojan Boats Forum
Topic: 89 mid cabin paralleling solenoid
Replies: 6
Views: 3947

Re: 89 mid cabin paralleling solenoid

How do you have the DC to DC charger hooked up? Has a battery switch been hooked up to the batteries and is it on all? Recheck all your wiring.
by prowlersfish
Fri Sep 15, 2023 8:22 am
Forum: Trojan Boats Forum
Topic: Serial number location for 57 Trojan sea queen
Replies: 5
Views: 4440

Re: Serial number location for 57 Trojan sea queen

From Bob, "On inside of the transom Generally two letters 4 numbers Or 2 numbers 4 numbers 1 inch digest stamped into wood. Also would be on the title often it is barred inside other numbers since they need 12 digit now. I can often find it in a registration number." Feel free to give him ...