1976 F32 sport fish

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
bssmnbll
Registered user
Posts: 33
Joined: Thu Jun 12, 2014 3:08 pm

1976 F32 sport fish

Post by bssmnbll »

I have a bent prop shaft, and wonder, does anyone know the length of the shaft and a good place to buy one??
User avatar
prowlersfish
2024 Gold Support
2024 Gold Support
Posts: 12645
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: 1976 F32 sport fish

Post by prowlersfish »

You can check with Beacon to see if they have one , you''ll need your hull # as there was at least 3 shaft sizes used . My listings show 3 sizes for 1976 a 1 1/4" x 90" a 1 1/4" x 83 1/2" depending if its 1 to 1 or a reduction . it also shows a 1 1/4 x 86" or diesels . I believe they also used a 1" on some early F32s that's not showing on my spec sheet . I put no guarantee on my specs :mrgreen:
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
Post Reply