Gauges are pegged

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
JKJ
Registered user
Posts: 15
Joined: Mon Jul 03, 2017 1:19 pm

Gauges are pegged

Post by JKJ »

I have a Trojan 28 with twin 318s. The port side gauges Fuel & temperature (top & bottom) work fine and register as I think they should. But the Starboard side gauges top and bottom are pegged to the right. Is this a grounding problem or a gauge problem? This is just the next item on my list to check and verify. Thanks for comments, going up this weekend and needed a place to look.
User avatar
The Dog House
Active User
Posts: 807
Joined: Mon Jan 09, 2012 6:51 am
Location: Bordentown, NJ

Re: Gauges are pegged

Post by The Dog House »

If your gauges are pegged to the right most likely the signal wires are shorting to ground. Faria has a very helpful troubleshooting guide at https://fariabeede.com/site_manuals/IS0100q.pdf .
1993 Sea Ray 200 Overnighter OB with 1993 Mercury 150 hp Outboard
1979 Starcraft 14' Rowboat with 2011 Mercury 9.9 hp Outboard
Former boat: 1971 Trojan F26
JKJ
Registered user
Posts: 15
Joined: Mon Jul 03, 2017 1:19 pm

Re: Gauges are pegged

Post by JKJ »

Thanks, Dog House
User avatar
prowlersfish
2024 Gold Support
2024 Gold Support
Posts: 12645
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: Gauges are pegged

Post by prowlersfish »

I was thinking a ground issue myself
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
Post Reply