Plastic Fuel Tanks installed in a 1977 F-32 model 321

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
BeaconMarineBob
Beacon Bob
Beacon Bob
Posts: 143
Joined: Thu Aug 06, 2009 6:39 pm
Location: Easton, PA
Contact:

Plastic Fuel Tanks installed in a 1977 F-32 model 321

Post by BeaconMarineBob » Fri Mar 16, 2018 6:29 pm

Here are some pictures and information on the installation of two Moeller 58 gal fuel tanks installed in a 1977 F-32 model 321.

Fuel Tanks are made of Polythylene

There tanks replaced the aft original galvanized round tanks.

Tanks are 44” long by 21.50” wide by 18.75” high

We have some good pricing and shipping cost on these tanks
* For a F-36 Moeller makes a 126 gal tank like the picture above.
54" Long by 32" Wide by 21.25"

** High add 2-1/8" to tank height to accommodate fill height
Attachments
A8CCE8E0-33A4-47D6-9192-8D705300B17C.jpeg
A8CCE8E0-33A4-47D6-9192-8D705300B17C.jpeg (58.64 KiB) Viewed 338 times
76658D34-51C2-42BA-9E42-27301BF8D28A.jpeg
76658D34-51C2-42BA-9E42-27301BF8D28A.jpeg (56.01 KiB) Viewed 338 times
25221C98-F4AF-401D-8BCA-04744C0642EF.jpeg
25221C98-F4AF-401D-8BCA-04744C0642EF.jpeg (67.9 KiB) Viewed 338 times
Bob Cushman, Owner
Beacon Marine Supply
Bob@BeaconMarineSupply.com
(609)713-4602
~ Please Contribute to the Forum ~

Post Reply