CRUSADERS 454 COOLING HOSE SIZE

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
NOTHING ELSE MATTERS
Registered user
Posts: 24
Joined: Sat Jul 29, 2017 3:03 pm
Location: Long Island NY

CRUSADERS 454 COOLING HOSE SIZE

Post by NOTHING ELSE MATTERS »

Hello every one !!
Question, need to know the size of the hose that goes from the exhaust manifold to the fresh water cool heat exchanger. Looks like 1" but not 100% sure. Boat is too far to go and check and I need to order a few feet.
Thank you and happy season !!!!
User avatar
P-Dogg
Active User
Posts: 959
Joined: Wed Jun 22, 2011 7:15 pm
Location: Near Baltimorgue, Murderland, where they prove every day that gun control doesn't work.

Re: CRUSADERS 454 COOLING HOSE SIZE

Post by P-Dogg »

1 1/4" on my 270s.
I needed a less expensive hobby, so I bought a boat!
User avatar
P-Dogg
Active User
Posts: 959
Joined: Wed Jun 22, 2011 7:15 pm
Location: Near Baltimorgue, Murderland, where they prove every day that gun control doesn't work.

Re: CRUSADERS 454 COOLING HOSE SIZE

Post by P-Dogg »

Well after further review, maybe its the main intake that is 1-1/4".... NVM.
I needed a less expensive hobby, so I bought a boat!
Post Reply