F32 scrap the boat or repair stringers?

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
frankr1957
Registered user
Posts: 5
Joined: Sun Jul 15, 2018 4:11 pm

F32 scrap the boat or repair stringers?

Post by frankr1957 »

Hi Everyone, I'm new on this forum. I've owned a 1974 Trojan F32 for over 20 years now and have to decide if it's worth replacing the stringers on this boat or should I dismantle it and sell off the parts. It has counter rotating LM318 engines, both run well, one has new heads, cam, lifters and gear set. The other engine had the same treatment two years ago. The velvet drive transmissions work well too. The hull has a soft spot on the top side near the left hatch, the rest of the hull looks ok and the interior shows its age. The swim platform is shot. The upper control cables are very stiff and need replacing too. In other words, it needs a bit of TLC over and above the stringer replacements. I have had estimates of over $12,000.00 for the stringer replacement alone and I doubt the boat is worth that much once repaired so, it's time to part it out! Please let me know if I'm wrong on that one. :?
Thanks
User avatar
prowlersfish
2024 Gold Support
2024 Gold Support
Posts: 12706
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: F32 scrap the boat or repair stringers?

Post by prowlersfish »

What is the boat worth to you ? Sure you can find F32s less then 12k But How good of shape are they ? Many go for a lot more . You know your boat and with new stringers you would have a boat you know with good stringers .
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
frankr1957
Registered user
Posts: 5
Joined: Sun Jul 15, 2018 4:11 pm

Re: F32 scrap the boat or repair stringers?

Post by frankr1957 »

Thanks for the response Prowlersfish. I agree, these Trojans are good boats, I've had over 20 years of good fun with mine.
I looked around in my area and even a good F32 has a hard time selling for 12K. They don't seem to sell at all!
So, I'm going to part it out. Other than on this forum, any other good places to list the parts for sale?
Thanks.
User avatar
prowlersfish
2024 Gold Support
2024 Gold Support
Posts: 12706
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: F32 scrap the boat or repair stringers?

Post by prowlersfish »

That's a shame .
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
frankr1957
Registered user
Posts: 5
Joined: Sun Jul 15, 2018 4:11 pm

Re: F32 scrap the boat or repair stringers?

Post by frankr1957 »

Yes, that's a shame, it's a good boat, just need someone that has the time to fix it.
I just posted it on Kijiji.ca , only asking $3,500.00 CDN (about $2,500.00 USD)
I doubt it will sell so, come fall, I'll be parting it out. I'll be listing the parts on this forum.
User avatar
Big D
Ultimate User
Posts: 2876
Joined: Sat May 01, 2010 10:39 pm
Location: Ontario, Canada

Re: F32 scrap the boat or repair stringers?

Post by Big D »

Always hate to see it come to that but the economics for any given individual is usually what dictates. One can look at this a couple of different ways when major repairs are involved; if you think of it as an investment or what you're going to get out of her financially after you sell versus what you've invested in the repairs, then typically 90% of boats of any brand aren't worth it, even some newer vintages. If one looks at it from a non-return/investment perspective, and simply loves the enjoyment they get out of a particular vessel with no thoughts of selling or the return when they do sell, then the expense becomes secondary, the fun and memories are the main motive because you simply can't put a price on such memories, they're priceless.

It looks like you've already made up your mind so I wish you luck. Hopefully it won't come to parting it out and you'll find someone that will see the value of extending her life. You may want to change your ad though, it implies that both engines are counter-rotaters but only one of them is/should be.
She was a 1969 36 ft wooden beauty with big blue 440s that we'll miss forever.
And thanks to the gang, 2012 Trojan Boater Of The Year
User avatar
Paul
Active User
Posts: 1141
Joined: Fri Jun 10, 2005 1:02 pm
Location: Windsor Ont.

Re: F32 scrap the boat or repair stringers?

Post by Paul »

Where can this boat be viewed?
Paul
"Cruise Control" 1978 F-26HT
"No Control" 2012 9' Grand RIB
frankr1957
Registered user
Posts: 5
Joined: Sun Jul 15, 2018 4:11 pm

Re: F32 scrap the boat or repair stringers?

Post by frankr1957 »

There are a few pictures at
https://www.kijiji.ca/v-powerboat-motor ... nFlag=true
I can also text you more pictures if you send me a text at 613-299-5582
frankr1957
Registered user
Posts: 5
Joined: Sun Jul 15, 2018 4:11 pm

Re: F32 scrap the boat or repair stringers?

Post by frankr1957 »

the boat is located in Cumberland Ontario, about 20 KM East from downtown Ottawa
User avatar
AwayOnBusine$$
Moderate User
Posts: 240
Joined: Sat May 09, 2015 5:53 pm
Location: 75 F32 Lake Simcoe Ontario

Re: F32 scrap the boat or repair stringers?

Post by AwayOnBusine$$ »

Would be interested in the back two pieces of glass both port and starboard sides. 289 404 4252
F32 Fly 1975
User avatar
Captrichc
Moderate User
Posts: 245
Joined: Mon Jul 30, 2018 7:08 pm
Location: Bronx, NY

Re: F32 scrap the boat or repair stringers?

Post by Captrichc »

If and when you are ready to part please reach out to me. I'd be interested in a bunch of parts.
1974 f32 Sedan
Twin 233 Mercruisers
bssmnbll
Registered user
Posts: 33
Joined: Thu Jun 12, 2014 3:08 pm

Re: F32 scrap the boat or repair stringers?

Post by bssmnbll »

I would be interested in parts also, hate to see the boat go that way. What is your aft deck made of , is it teak or fiberglass?? Also, do you have stock rudders? Thanks, Bill Nelson
Post Reply