Crusader 270 fuel line leaking

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
larryeddington
2024 Gold Support
2024 Gold Support
Posts: 1870
Joined: Mon Sep 28, 2009 5:08 pm
Location: Canton, TX Boat on TEXOMA

Crusader 270 fuel line leaking

Post by larryeddington »

Anyone had the inverted flare fitting on the steel fuel line from fuel pump to carby leak. It is double flared. I am thinking the fix will be with 3/8 copper using the steel ending fittings and of course use double flares.

thoughts, I like the steel line but has some rust and think copper will seal better.
Larry Eddington
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
User avatar
Big D
Ultimate User
Posts: 2874
Joined: Sat May 01, 2010 10:39 pm
Location: Ontario, Canada

Re: Crusader 270 fuel line leaking

Post by Big D »

Larry, I'd use stainless line, especially if you're anywhere near salt water. There shouldn't be a problem with it sealing. Take a close look to ensure nothing is cracked from having been over-tightened in the past. Check the fittings externally and the flared mating surface inside. The line should also not be entering the fitting on an angle.
She was a 1969 36 ft wooden beauty with big blue 440s that we'll miss forever.
And thanks to the gang, 2012 Trojan Boater Of The Year
Post Reply