10.8 International vent boxes
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
10.8 International vent boxes
I seem to get large amounts of water entering my bilge through the large hose attached to each vent box behind the stainless grill. Anyone know of a way to avoid this. Also concerned with the water running down the hose into the blower. Thanks in advance.
- RWS
- Ultimate User
- Posts: 2857
- Joined: Sat Feb 18, 2006 7:01 am
- Location: West Coast Florida
- Contact:
Re: 10.8 International vent boxes
The blower on the 1983 express is mounted up high on the port side - tight against the engine room bulkhead.
Water not an issue on this model, yours may be the same
RWS
Water not an issue on this model, yours may be the same
RWS
1983 10 Meter SOLD after 21 years of adventures
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED