Steering piston leaking

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
paskyhawk
2020 Forum Support
2020 Forum Support
Posts: 22
Joined: Tue Aug 13, 2013 10:32 am

Steering piston leaking

Post by paskyhawk »

The steering piston on my 1979 tri cabin is leaking at the piston rod. Does anyone know if this unit can be rebuilt or is there a replacement available.

Thanks Rich

Image
Attachments
IMG_1503.jpg
IMG_1503.jpg (70.21 KiB) Viewed 862 times

User avatar
prowlersfish
2020 Gold Support
2020 Gold Support
Posts: 11793
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: Steering piston leaking

Post by prowlersfish »

I would contact Beacon marine , see what they have .
TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
2009 TROJAN RENDEZVOUS
Port Kinsale 2010 & 2011. Solomons get together 2011.

Stupidav
Registered user
Posts: 3
Joined: Fri Nov 22, 2019 6:17 am

Re: Steering piston leaking

Post by Stupidav »

While I am not 100% sure that yours can, everyone that I have come across, we have been able to rebuild. If Beacon Marine doesn’t have a means to do it, I would contact a local reputable hydraulics place to do it if you don’t want to tackle it on your own.

Ultimately they are pretty easy to rebuild. Once the unit has been removed, the end caps unscrew, and slide them off. Carefully remove the old seals and match them up at a supplier. You can also slide out the piston/rod assembly and replace the seals on that as well as long as you are there. If you go this route look over all the parts to make sure there is no scratches in the areas where the movement occurs, and you should be fine.

paskyhawk
2020 Forum Support
2020 Forum Support
Posts: 22
Joined: Tue Aug 13, 2013 10:32 am

Re: Steering piston leaking

Post by paskyhawk »

Thanks, I will pull it off in the spring. We have a good hydraulics place. I wasn't sure if it had some kind of crimped ends.

Post Reply