Page 1 of 1
replacement distributors
Posted: Sun May 03, 2020 9:08 pm
by hammerhead
looking to replace the old distributors on f30. both motors are 318's is this the direct replacements.
PerTronix Flame-Thrower Plug and Play Marine Distributors with Ignitor II® Module D241801
Re: replacement distributors
Posted: Mon May 04, 2020 1:00 pm
by prowlersfish
Could not find any info on them . I know there can be issues on the opposite turn engine . do a search on this site
Re: replacement distributors
Posted: Mon May 04, 2020 2:22 pm
by zedtwentyate
AAA Marine is a great source for HEI distributors...might give them a shout. Of coruse, Bob at Beacon should have the factory units as well...
Re: replacement distributors
Posted: Thu May 07, 2020 3:20 pm
by larryeddington
Re: replacement distributors
Posted: Thu May 07, 2020 3:45 pm
by Brooks
I bought two Pertronix D241801 distributors for my F32 with Chrysler Marine 318 engines. I've had zero issues with them. These distributors "don't care" if the engine is CW or CCW; as we all know, the distributor turns the same way, and only your wiring will differ.
https://pertronix.com/pertronix-d241801 ... rRjgqhKiUk
Hope this helps
Brooks
Re: replacement distributors
Posted: Sun May 24, 2020 7:19 pm
by hammerhead
how did you wire them up?. i got the same distributor and framethrower coil but no wireing instructions
Re: replacement distributors
Posted: Sun May 24, 2020 10:51 pm
by prowlersfish
Any support from the seller ?
Re: replacement distributors
Posted: Mon Jun 01, 2020 5:35 pm
by larryeddington
Pertronix clariied any questions I had. It was simple as there are only 2 wires going into distributor. Ignition wire to red wire on distributor black ire to plus side of coil and . Oh crap I do not remember but somewhere is a diagram and protronix will help. They ere excellent there.