MCCK Generator nameplate location

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
User avatar
Scott67
Registered user
Posts: 20
Joined: Wed Nov 03, 2021 8:44 am
Location: Jacksonville, FL
Contact:

MCCK Generator nameplate location

Post by Scott67 »

Good morning folks, I'm trying to locate a new/used drip pan for my generator for when I pull it out later this month. Looking all over the generator to no avail for a nameplate. Hoping you guys can shed some light on how else to determine the "spec" as there are three difference pans available depending on the spec number.
The hull number is: 340-8053, 1988 10m Intl. Mid-cabin

Thanks in advance for any assist.
"Speakeasy"
1988 Intl 10 Meter Mid-Cabin Exp
Model 340
Twin 454 (350hp) Crusaders
1.5:1 Gearboxes
Jacksonville, FL

User avatar
prowlersfish
2022 Gold Support
2022 Gold Support
Posts: 12408
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: MCCK Generator nameplate location

Post by prowlersfish »

Give Bob at beacon marine a call he knows the Onan very well


call Bob @ 609-713-4602.
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D

User avatar
Scott67
Registered user
Posts: 20
Joined: Wed Nov 03, 2021 8:44 am
Location: Jacksonville, FL
Contact:

Re: MCCK Generator nameplate location

Post by Scott67 »

I called him just the other day regarding some electrical issues I was having. I feel like I'm being a pain, but I may do so because all my searches have turned up empty. They probably just don't make the pans for these oldies anymore.
"Speakeasy"
1988 Intl 10 Meter Mid-Cabin Exp
Model 340
Twin 454 (350hp) Crusaders
1.5:1 Gearboxes
Jacksonville, FL

User avatar
prowlersfish
2022 Gold Support
2022 Gold Support
Posts: 12408
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: MCCK Generator nameplate location

Post by prowlersfish »

Bob may have one, or you could have one made.
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D

User avatar
Big D
Ultimate User
Posts: 2874
Joined: Sat May 01, 2010 10:39 pm
Location: Ontario, Canada

Re: MCCK Generator nameplate location

Post by Big D »

If I recall, the spec plates were mounted on the flywheel and belt cover, this seems to be the first thing that goes missing and with it the info plate. I think the serial number is also stamped on the top of the block just behind the base of the lifting ring.
She was a 1969 36 ft wooden beauty with big blue 440s that we'll miss forever.
And thanks to the gang, 2012 Trojan Boater Of The Year

User avatar
Scott67
Registered user
Posts: 20
Joined: Wed Nov 03, 2021 8:44 am
Location: Jacksonville, FL
Contact:

Re: MCCK Generator nameplate location

Post by Scott67 »

Big D,
Thanks for that info. Yeah, the one on the flywheel cover (if there was one) is gone. The only plate on the cover is regarding oil recommendations for the MCCK Generators. I will look behind the lifting ring today for the numbers.

Thanks again!

Scott
"Speakeasy"
1988 Intl 10 Meter Mid-Cabin Exp
Model 340
Twin 454 (350hp) Crusaders
1.5:1 Gearboxes
Jacksonville, FL

User avatar
Scott67
Registered user
Posts: 20
Joined: Wed Nov 03, 2021 8:44 am
Location: Jacksonville, FL
Contact:

Re: MCCK Generator nameplate location

Post by Scott67 »

No luck on the serial number research. Once I get the genny pulled next week and clean it up on the bench, perhaps I'll be able to locate something. I've decided to just make a pan for it....no luck anywhere for them.
"Speakeasy"
1988 Intl 10 Meter Mid-Cabin Exp
Model 340
Twin 454 (350hp) Crusaders
1.5:1 Gearboxes
Jacksonville, FL

User avatar
Big D
Ultimate User
Posts: 2874
Joined: Sat May 01, 2010 10:39 pm
Location: Ontario, Canada

Re: MCCK Generator nameplate location

Post by Big D »

She was a 1969 36 ft wooden beauty with big blue 440s that we'll miss forever.
And thanks to the gang, 2012 Trojan Boater Of The Year

BeaconMarineBob
Beacon Bob
Beacon Bob
Posts: 252
Joined: Thu Aug 06, 2009 6:39 pm
Location: Easton, PA
Contact:

Re: MCCK Generator nameplate location

Post by BeaconMarineBob »

We have a drip pan

Always feel free to call
We are here to help

609 713 4602
Bob Cushman, Owner
Beacon Marine Supply
Bob@BeaconMarineSupply.com
(609)713-4602
~ Please Contribute to the Forum ~

Post Reply