Is there any reason that I would not have dc power available when boat comes out of water? I took batteries out for winter(4) and when I placed back in boat, I have no ignition power for either port or starboard engine.
I have a battery isolation switch for each engine to select 1, 2 or all batteries but that is all I am aware of in switches that could cause this
Any help really appreciated
Jim k
1974 f32 dc electric
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
batter switches
Ther are two power switches just below the lower helm station. One for starbord and one for port. If these were turned off there will be no power to the ignition. These are separate from the battery selector switch located near your battery bank in the bilge.