Trojan 36 Sedan Teak Refinishing

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
planb
Registered user
Posts: 10
Joined: Mon Mar 27, 2006 7:56 pm

Trojan 36 Sedan Teak Refinishing

Post by planb »

I am am trying to refinish my teak toe rail and the teak cap at the top of the transom area. I have been sanding the teak with synthetic steel wool pads, cleaning with teak cleaner and then oiling with Watco. Last year this brought excellent results. This year however after my prep work and oiling the teak is rough and very dark and splotchy in areas.

Do I need to sand the teak down to bare wood and start over? Any suggestions on refinishing teak and what can be used to fill seams and or small surface scratches and minor cracks?
Buckknekkid
Sporadic User
Posts: 158
Joined: Sat Oct 29, 2005 8:22 am
Location: Taranna

Post by Buckknekkid »

sand it ALL off. I spent well over 140 hours on mine and it has come back really nice with varnish and penetrol.
http://www.barclaydevelopments.com/temp ... CF0002.JPG
F36 ~
SHES SOLDDDDDD
Post Reply