1987 10 meter mid cabin complete restoration.

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

User avatar
yorklyn
Active User
Posts: 1139
Joined: Fri Oct 26, 2007 10:14 pm
Location: Hockessin Delaware

Post by yorklyn »

I hope I dont drive everyone nuts with my updates but its really helping me stay motivated!
Just spent two days in the boat with two of my workers doing nothing but grinding the last remaining gell coat from all interior bilge areas (Yes they hate me!)
I decided to add an additional layer of 24oz woven roving to the bottom of the bilge between all of the new stringers. I was planing on simply rolling a few coats of west system epoxy over everything in the bilge to ensure everything was completly waterproof. After preping for the epoxy I figured I might as well use up the remaining roving I had. This should help tie everything together with an epoxy bond and give me a waterproof barrier coat at the same time.
Image[/img

[imgImage][/img]

[imgImage][/img]

[imgImage]

[/imgImage]
Todd Pote
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
User avatar
RWS
Ultimate User
Posts: 2857
Joined: Sat Feb 18, 2006 7:01 am
Location: West Coast Florida
Contact:

Post by RWS »

Hi Todd !

It's all about doing these projects together.

You're a lucky man to have your better half in there with you.

See what I mean?

RWS

Image
1983 10 Meter SOLD after 21 years of adventures
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/

WEBSITE & SITELOCK TOTALLY SELF FUNDED
User avatar
yorklyn
Active User
Posts: 1139
Joined: Fri Oct 26, 2007 10:14 pm
Location: Hockessin Delaware

Post by yorklyn »

[imgImage

She's avoided the project alittle since I had her help cut the stringers out! LOL][/img]
Todd Pote
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
User avatar
Paul
Active User
Posts: 1141
Joined: Fri Jun 10, 2005 1:02 pm
Location: Windsor Ont.

Post by Paul »

I couldn't agree more. My wife was an integral part of the restoration of our boat as well. Dirty jobs or fun jobs, it didn't matter. It was great time that we spent together and we both have a connection to this boat.
Paul
"Cruise Control" 1978 F-26HT
"No Control" 2012 9' Grand RIB
User avatar
alexander38
Ultimate User
Posts: 3179
Joined: Sat Sep 27, 2008 6:48 am

Post by alexander38 »

glad to see the Supervisors are helpin' out.. :lol:
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !

http://s852.beta.photobucket.com/user/t ... 8/library/
User avatar
yorklyn
Active User
Posts: 1139
Joined: Fri Oct 26, 2007 10:14 pm
Location: Hockessin Delaware

Post by yorklyn »

Well once again I thought I'd get more done today than I did. I keep getting side tracked with other things to repair. I was planning on reinforcing the stern with some additional tabbing and some additional mat laid over plywood strips to reduce the flex when fat people like myself are on the swim platform! I just replaced the forward "gas tank bulkhead" that was rotted on the port side. I thought I could repair the rot in the same one on starbord side but after closer inspection I decided to replace it. I managed to get it made up and installed as well as reinforced two of the four plywood stern "stiffiners". Ran out of west system epoxy again! used a large 5.5 gal kit as well as a 1.25 kit. I have another 5.5 kit ordered but it wont be in until next thursday. Guess I'm buying another small kit so I can keep working tomorrow!

Paper Templet
Image

[/img]Image

Ready to install
Image

Made these out of marine ply to help stiffen up the stern. plan on putting them across the stern and glassing over them.
Image[/img]
Todd Pote
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
User avatar
BobCT
Active User
Posts: 1066
Joined: Mon Sep 07, 2009 9:01 pm
Location: New Haven CT

Post by BobCT »

Todd, I beefed up the swim platform supports too but didn't do any glass work. All I did was replace the really narrow wood backing plates (inside the hull) with wider and taller pieces.

It was better but I thought I could park a car on the platform when I was done. I found out afterwards that most of the flex is the transom part of the hull itself, it's actually pretty thin.

I think you're on the right track trying to reinforce that.


Bob
1988 10m mid cabin
jefflaw35

Post by jefflaw35 »

Todd the pics are awsome and helping me alot, dont worry about getting on anyones nerves, ive already killed that problem, its great to see another mans wife doing work, mine is right there with us. true bonding.. keep it up and keep posting. I need all the help and ideas I can get. your work is looking great!!!
User avatar
RWS
Ultimate User
Posts: 2857
Joined: Sat Feb 18, 2006 7:01 am
Location: West Coast Florida
Contact:

Post by RWS »

BobCT wrote:Todd, I beefed up the swim platform supports too but didn't do any glass work. All I did was replace the really narrow wood backing plates (inside the hull) with wider and taller pieces.

It was better but I thought I could park a car on the platform when I was done. I found out afterwards that most of the flex is the transom part of the hull itself, it's actually pretty thin.

I think you're on the right track trying to reinforce that.


Bob
did the same but used starboard

RWS
1983 10 Meter SOLD after 21 years of adventures
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/

WEBSITE & SITELOCK TOTALLY SELF FUNDED
User avatar
yorklyn
Active User
Posts: 1139
Joined: Fri Oct 26, 2007 10:14 pm
Location: Hockessin Delaware

Post by yorklyn »

For the record I just spent 40 min typing my progress from this past weeked only to have my computer lock up and erase everything. I will repost tomorrow. did have a very productive weekend!!
Todd Pote
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
User avatar
DOUGNASH
Moderate User
Posts: 299
Joined: Thu Apr 15, 2010 7:53 am
Location: Greenpoint, Brooklyn NY

Post by DOUGNASH »

jefflaw35 wrote:Todd the pics are awsome and helping me alot, dont worry about getting on anyones nerves, ive already killed that problem
It's all good

:lol: :lol: :lol:
1985 13 Meter International Express w/ 8v71tti 462hp Detroits, 43' x 16'3"
Image
User avatar
yorklyn
Active User
Posts: 1139
Joined: Fri Oct 26, 2007 10:14 pm
Location: Hockessin Delaware

Post by yorklyn »

had some help from my neighbor this weekend. An extra set of hands sure makes a difference! got the limber holes glassed in
[imgImage]

Finished glassing the bulkhead between the engine room and mid cabin

[/imgImage]

Completed the first layer of glass on the stern supports

[imgImage]

[/imgImage]

And finished sealing the underside of the cross-members between the stringers

[imgImage][/img]
Todd Pote
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
User avatar
yorklyn
Active User
Posts: 1139
Joined: Fri Oct 26, 2007 10:14 pm
Location: Hockessin Delaware

Post by yorklyn »

Started making the air intake flanges today. used a hole saw to cut 4 inch holes in 3/4 plywood. the double ones will be the inserts for the side vents and the other individual ones will have the bilge hoses stapled to them ,then bolted to the rear intakes. I put a layer of glass on the double intakes to protect them since the old wood was so rotted.
[imgImage]

[/imgImage]

Image

[/imgImage

][imgImage][/img]
Todd Pote
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
User avatar
yorklyn
Active User
Posts: 1139
Joined: Fri Oct 26, 2007 10:14 pm
Location: Hockessin Delaware

Post by yorklyn »

Almost ready to start digging out pieces to put this thing together!

[img][img]http://i247.photobucket.com/albums/gg14 ... 141917.jpg[/img][/img]
Todd Pote
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
User avatar
yorklyn
Active User
Posts: 1139
Joined: Fri Oct 26, 2007 10:14 pm
Location: Hockessin Delaware

Post by yorklyn »

25 feet of glass left! There is a light at the end of the tunnel!!!

[/imgImage]
Todd Pote
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
Post Reply