Page 1 of 1

Looking for New NiBral Prop

Posted: Thu May 09, 2013 10:02 pm
by Paul - SW Ontario
14RH10, 3 blade, for 1" shaft.
Bit surprised to find out how difficult it is to find this particular prop when so many were made.
Done the usual search engine thing, have corresponded with a couple of prop makers...nothing.
After so many years on this prop, it's time for a new one, and keep the one I have as a spare.

1973 Trojan F25.5, Chrysler 318, 225 hp, 1:1 Velvet Direct Drive

Can anyone shed some light on where to find one?

Thanks in advance...

Paul - SW Ontario

Re: Looking for New NiBral Prop

Posted: Fri May 10, 2013 6:33 am
by MattSC
Paul

I switched from a Dyna Jet to the DJX series propeller last year. It is made in 14" Diameter. It performs a little better than my Dyna Jet. I'm running a 14x10 LH with a cup. If you're looking for the Dyna-Jet Bob at Beacon might be able to get one for you.


Matt

http://www.miwheel.com/propellers/inboa ... ropellers/

Michigan Wheel dealer locator
http://www.miwheel.com/propellers/dealers/

Re: Looking for New NiBral Prop

Posted: Fri May 10, 2013 7:26 am
by Paul - SW Ontario
Thank you Matt...

Appreciate your time and expertise!

Paul

Re: Looking for New NiBral Prop

Posted: Sat May 11, 2013 3:27 am
by 32pacemaker
Hi Paul, I found mine on ebay R14x10 nibral with a cup looked brand new for a 100 bucks and some shipping the guy said it was off a trojan

Re: Looking for New NiBral Prop

Posted: Sun May 12, 2013 5:14 pm
by boondocks
Try Bayview Propeller near Peterborough, ON - 705 654 4409 or email bayview.propeller@sympatico.ca - they had props, shafts, struts and rudder for by Trojan

Re: Looking for New NiBral Prop

Posted: Sun May 12, 2013 7:55 pm
by Paul - SW Ontario
Thanks for the additional info guys...

Paul

Re: Looking for New NiBral Prop

Posted: Tue May 14, 2013 2:48 pm
by Paul - SW Ontario
boondocks....

Just letting you know that Bayview Propeller was able to get me my new prop...
had one there waiting for me!

Thanks again for the help guys.

Paul

Re: Looking for New NiBral Prop

Posted: Fri May 17, 2013 8:29 am
by boondocks
Hey Paul - glad to hear you got a propeller - unfortunately, I seem to encounter floating debris, deadheads, etc. too often - never a rock or shoal!(I guess there is something to say about the saying"touch wood") - hence I have used the services of Bayview Propeller several times. I always get good service and my damaged propellers come back looking and performing better than when they were new - hope you enjoy the summer on your boat

Re: Looking for New NiBral Prop

Posted: Thu Aug 29, 2013 7:02 pm
by bevans2
Greetings. I have a left and right hand set of NI-BRAL 14 X 10 Grand Rapids Michigan propellers. Brand new never been used. Will sell the set for $750.00. Can send picture if you wish.
My email address: b.evans.1983@comcast.net

Re: Looking for New NiBral Prop

Posted: Sun Oct 22, 2017 1:54 am
by Goombaiii
Please send pictures

Re: Looking for New NiBral Prop

Posted: Sun Oct 22, 2017 2:03 am
by Goombaiii
Hello I am also looking for 14x10 LH an RH with 1" shaft new or used I have a 1979 F28 with 318 any one have them out there for a good price?

Re: Looking for New NiBral Prop

Posted: Sun Oct 22, 2017 7:54 am
by prowlersfish
You can check with Beacon marine site sponsor

Re: Looking for New NiBral Prop

Posted: Tue Oct 24, 2017 11:51 am
by 32pacemaker
I think i have a 14x 10 rt hand

Re: Looking for New NiBral Prop

Posted: Wed Oct 25, 2017 11:39 pm
by Goombaiii
I need a set RH an LH

Re: Looking for New NiBral Prop

Posted: Sun Nov 12, 2017 1:29 am
by oldboat1
Michigan Wheel in Grand Rapids used to be pretty good at customer service -- might check in with them for advice and pricing. Could give you some additional baseline info, anyway.