Cockpit Step

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
mikester
Registered user
Posts: 1
Joined: Wed Feb 03, 2010 2:41 pm
Location: Mentor, Ohio

Cockpit Step

Post by mikester »

Does anyone know where I can get cockpit step for a 1975 F 26.
User avatar
Redfin
Registered user
Posts: 19
Joined: Mon Jul 29, 2013 7:47 pm
Location: Lake Superior

Re: Cockpit Step

Post by Redfin »

Mike,

That's a good question as I only have one of the two left. Still haven't figured out where to get one, but I'm assuming the best place would be from a junked hull. Either that or I'd find something close in design and just do a retro-fit. I hate doing that to original equipment, but sometimes you have to! If you have one of the two like I do, you could have one fabricated...?

I could send you some dimensions off mine too if that would help at all. Let me know!
Sincerely,

Redfin

1978 Trojan F-26 HT Exp
1978 Sea Ray SRV 240 HT
1981 Whaler 18 O/R
1967 O'Day Seven-Eleven
User avatar
gitchisum
Moderate User
Posts: 226
Joined: Sun May 05, 2013 1:06 am
Location: Kewaunee, WI

Re: Cockpit Step

Post by gitchisum »

Redfin,

I am also in the market for a step. Was fishing with some friends this weekend and they asked when I was putting a step in

thought about just building an 8-9" teak box that would be a step. Would like to have a beeter system.

Would you be willing to share some pics and dimensions of what you have?

thanks
88 321 Sedan 270 crusaders
2001 Seadoo Challenger 2000
97 Lowe Roughneck 17TC
1948 Alumacraft K14, Evinrude twin 6hp " Still kickin"
User avatar
Redfin
Registered user
Posts: 19
Joined: Mon Jul 29, 2013 7:47 pm
Location: Lake Superior

Re: Cockpit Step

Post by Redfin »

gitchisum wrote:Redfin,

I am also in the market for a step. Was fishing with some friends this weekend and they asked when I was putting a step in

thought about just building an 8-9" teak box that would be a step. Would like to have a beeter system.

Would you be willing to share some pics and dimensions of what you have?

thanks
Will do as soon as I can!
Sincerely,

Redfin

1978 Trojan F-26 HT Exp
1978 Sea Ray SRV 240 HT
1981 Whaler 18 O/R
1967 O'Day Seven-Eleven
User avatar
lawyerdave71
Moderate User
Posts: 423
Joined: Sat Dec 03, 2011 8:24 pm
Location: Chicago, Illinois

Re: Cockpit Step

Post by lawyerdave71 »

I have seen them online. I am assuming stainless steel with the two steps.

They range in price from $60 to $100
Captain Dave -

1978 F30 Flybridge Express
User avatar
gitchisum
Moderate User
Posts: 226
Joined: Sun May 05, 2013 1:06 am
Location: Kewaunee, WI

Re: Cockpit Step

Post by gitchisum »

Thanks Dave.

Need to do something to keep it tip top. Want to be able to turn it quick in case Charlie ever hits the market. Your only ~100 miles away. :D
88 321 Sedan 270 crusaders
2001 Seadoo Challenger 2000
97 Lowe Roughneck 17TC
1948 Alumacraft K14, Evinrude twin 6hp " Still kickin"
User avatar
Redfin
Registered user
Posts: 19
Joined: Mon Jul 29, 2013 7:47 pm
Location: Lake Superior

Re: Cockpit Step

Post by Redfin »

lawyerdave71 wrote:I have seen them online. I am assuming stainless steel with the two steps.

They range in price from $60 to $100
Dave,

Where did you see them? I did a bit of searching, just found new ones made by Garelick.
Sincerely,

Redfin

1978 Trojan F-26 HT Exp
1978 Sea Ray SRV 240 HT
1981 Whaler 18 O/R
1967 O'Day Seven-Eleven
Post Reply