Trojan International Logos - Part II

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
User avatar
RWS
Ultimate User
Posts: 2857
Joined: Sat Feb 18, 2006 7:01 am
Location: West Coast Florida
Contact:

Trojan International Logos - Part II

Post by RWS »

In 2004 we received permission to reproduce the International specific vinyl logos found on the gunnel sides.

We ran ten sets for 10, 10.8 and 11 meter vessels.

The cost at the time was $79.10 for both sides.

One of the Forum members has asked me to see if there is enough interest to do this again.

The cost this time would of course be based on how many sets could be produced. More sets = less cost per set.

So this post is a "floater" to see what, if any interest is out there to run this again.

Here is the link to that 2014 thread which contains several photos.

http://www.trojanboats.net/wforum/viewt ... t=rws+logo

Thanks,

RWS
1983 10 Meter SOLD after 21 years of adventures
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/

WEBSITE & SITELOCK TOTALLY SELF FUNDED
Capt Matto
Registered user
Posts: 1
Joined: Tue May 24, 2016 12:39 am

Re: Trojan International Logos - Part II

Post by Capt Matto »

Thanks again RWS!
User avatar
tcollins2
2024 Forum Support
2024 Forum Support
Posts: 169
Joined: Wed Jun 17, 2015 1:25 pm
Location: Huntington, NY

Re: Trojan International Logos - Part II

Post by tcollins2 »

Better late than never, I'm in, 12 Meter.
1990 Trojan 12M International Express Detroit Diesels 6-71T's, 425HP
Post Reply