In 2004 we received permission to reproduce the International specific vinyl logos found on the gunnel sides.
We ran ten sets for 10, 10.8 and 11 meter vessels.
The cost at the time was $79.10 for both sides.
One of the Forum members has asked me to see if there is enough interest to do this again.
The cost this time would of course be based on how many sets could be produced. More sets = less cost per set.
So this post is a "floater" to see what, if any interest is out there to run this again.
Here is the link to that 2014 thread which contains several photos.
http://www.trojanboats.net/wforum/viewt ... t=rws+logo
Thanks,
RWS
Trojan International Logos - Part II
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
- RWS
- Ultimate User
- Posts: 2857
- Joined: Sat Feb 18, 2006 7:01 am
- Location: West Coast Florida
- Contact:
Trojan International Logos - Part II
1983 10 Meter SOLD after 21 years of adventures
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED
-
- Registered user
- Posts: 1
- Joined: Tue May 24, 2016 12:39 am
Re: Trojan International Logos - Part II
Thanks again RWS!
Re: Trojan International Logos - Part II
Better late than never, I'm in, 12 Meter.
1990 Trojan 12M International Express Detroit Diesels 6-71T's, 425HP