Made a new dinghy cover!
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
- Paul - SW Ontario
- Moderate User
- Posts: 233
- Joined: Tue Apr 21, 2009 9:33 am
- Location: Woodstock, Ontario
- Contact:
Made a new dinghy cover!
Last year we invested in a new Highfield RIB. The factory cover near basically fell apart after one season.
Sooo...bring in some Sunbrella Marine, add a bit of good UV thread...finish off with some heat press vinyl insignia...
And whullah!...A durable, yet pretty outfit for our tender.
Sooo...bring in some Sunbrella Marine, add a bit of good UV thread...finish off with some heat press vinyl insignia...
And whullah!...A durable, yet pretty outfit for our tender.
1973 Trojan F25.5 - SW, ON.
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
- P-Dogg
- Active User
- Posts: 959
- Joined: Wed Jun 22, 2011 7:15 pm
- Location: Near Baltimorgue, Murderland, where they prove every day that gun control doesn't work.
Re: Made a new dinghy cover!
Looking good! We have 10' Apex with a 15hp Yamaha. Adds a whole 'nother dimension to boating. Like bringing along a portable amusement ride.
I needed a less expensive hobby, so I bought a boat!
- Paul - SW Ontario
- Moderate User
- Posts: 233
- Joined: Tue Apr 21, 2009 9:33 am
- Location: Woodstock, Ontario
- Contact:
Re: Made a new dinghy cover!
Exactly....we just replaced that old Merc 8 hp with a brand new Suzuki 20 hp battery less fuel injected 4 stroke.P-Dogg wrote:Looking good! We have 10' Apex with a 15hp Yamaha. Adds a whole 'nother dimension to boating. Like bringing along a portable amusement ride.
Boat show special...6 year warranty.
Can't wait till spring.
1973 Trojan F25.5 - SW, ON.
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
- prowlersfish
- 2024 Gold Support
- Posts: 12658
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
Re: Made a new dinghy cover!
Nice Job
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat
- WayWeGo
- 2024 Gold Support
- Posts: 782
- Joined: Fri Feb 13, 2015 11:13 am
- Location: Oakton, VA / Rhode River - Chesapeake Bay
Re: Made a new dinghy cover!
Really nice work! I like all the details that take it from a simple cover to a masterpiece.
We have a 11 1/2' aluminum floor inflatable with a 20HP 2-stroke Merc that looks a lot like the one in the photos. What a blast to play with! We also have a 6hp Merc that will not plane with me in it, but it might just get on plane with one of my daughters by herself. That will be their motor until they get a little bit more skilled with it. The 20HP is a beast and could easily get out of control. I guess that is why I like it so much!
The downside of a large dinghy is bringing it along with us when we cruise. We have not taken it very far, so towing has been OK, but we need to figure out how to get it on the boat for longer trips. A smaller/lighter one would have been great, but we often have 4-5 adults and three dogs to schlep around and did not want to have to make multiple trips, especially since we are planning on longer trips in the dink.
What do you guys do to bring yours along? I know prowlersfish has his on the bow with a crane, but that is not what I would like to do. I have been looking at all the options that I can find (flip up, slide on, etc.), and none seem to be good for us for one reason or another.
We have a 11 1/2' aluminum floor inflatable with a 20HP 2-stroke Merc that looks a lot like the one in the photos. What a blast to play with! We also have a 6hp Merc that will not plane with me in it, but it might just get on plane with one of my daughters by herself. That will be their motor until they get a little bit more skilled with it. The 20HP is a beast and could easily get out of control. I guess that is why I like it so much!
The downside of a large dinghy is bringing it along with us when we cruise. We have not taken it very far, so towing has been OK, but we need to figure out how to get it on the boat for longer trips. A smaller/lighter one would have been great, but we often have 4-5 adults and three dogs to schlep around and did not want to have to make multiple trips, especially since we are planning on longer trips in the dink.
What do you guys do to bring yours along? I know prowlersfish has his on the bow with a crane, but that is not what I would like to do. I have been looking at all the options that I can find (flip up, slide on, etc.), and none seem to be good for us for one reason or another.
1975 F-36 Convertible
Twin Chrysler 440's
Twin Chrysler 440's
Re: Made a new dinghy cover!
I bought one of those cargo net units that strap the dinghy to the back of the boat. So far so good. If you have a large motor, that needs to be removed before you lift the boat out of the water. Cargo net cannot hold the motor and dinghy.
1988 Trojan 11 Meter Express
My wife made me do it... Really.....
My wife made me do it... Really.....
Re: Made a new dinghy cover!
If we don't tow ours, one of us just drives ours behind in the lee of the big boat.
El L Sea
Fort Myers, FL
1988 Trojan 12m International Sport Fisherman
2017 Boston Whaler 130 Tender w/ 40HP Mercury
Fort Myers, FL
1988 Trojan 12m International Sport Fisherman
2017 Boston Whaler 130 Tender w/ 40HP Mercury
- Paul - SW Ontario
- Moderate User
- Posts: 233
- Joined: Tue Apr 21, 2009 9:33 am
- Location: Woodstock, Ontario
- Contact:
Re: Made a new dinghy cover!
Our swim platform is big enough to carry it.
Currently designing a roller set up to pull it up and on the platform from the port side with very little effort.
Then with a few strategically placed lanyards and we will be good to go.
Currently designing a roller set up to pull it up and on the platform from the port side with very little effort.
Then with a few strategically placed lanyards and we will be good to go.
1973 Trojan F25.5 - SW, ON.
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
- Paul - SW Ontario
- Moderate User
- Posts: 233
- Joined: Tue Apr 21, 2009 9:33 am
- Location: Woodstock, Ontario
- Contact:
Re: Made a new dinghy cover!
The pic above is with our old Zodiac & 5 hp...
After a trial run for fit, the new Highfield & 20 hp will sit the same on the platform...except bow to starboard, and will stay there throughout the season at the marina slip. Like the idea of it being out of the water and locked to the Trojan while we are gone.
For the sake of curiosity, that photo was taken at the Famous Henry's Restaurant on Frying Pan Island (San Souci) in the 30,000 Islands Georgian Bay, Ontario.
After a trial run for fit, the new Highfield & 20 hp will sit the same on the platform...except bow to starboard, and will stay there throughout the season at the marina slip. Like the idea of it being out of the water and locked to the Trojan while we are gone.
For the sake of curiosity, that photo was taken at the Famous Henry's Restaurant on Frying Pan Island (San Souci) in the 30,000 Islands Georgian Bay, Ontario.
Last edited by Paul - SW Ontario on Thu Feb 16, 2017 1:34 pm, edited 1 time in total.
1973 Trojan F25.5 - SW, ON.
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
- Paul - SW Ontario
- Moderate User
- Posts: 233
- Joined: Tue Apr 21, 2009 9:33 am
- Location: Woodstock, Ontario
- Contact:
Re: Made a new dinghy cover!
My other pride & joy deploys the dinghy in a different way!
1973 Trojan F25.5 - SW, ON.
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
Re: Made a new dinghy cover!
Super job on the cover! the details are awesome
Barrie
Aylmer Ontario, Canada
36' Tri-Fly "The Obvious"
Aylmer Ontario, Canada
36' Tri-Fly "The Obvious"
- Paul - SW Ontario
- Moderate User
- Posts: 233
- Joined: Tue Apr 21, 2009 9:33 am
- Location: Woodstock, Ontario
- Contact:
Re: Made a new dinghy cover!
Thanks...like you 're work, the details are what make the difference when the job is finished.Barrie wrote:Super job on the cover! the details are awesome
1973 Trojan F25.5 - SW, ON.
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke