F26 needs some seats

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

rsciolino
Registered user
Posts: 39
Joined: Sun Feb 17, 2008 8:24 pm
Location: Upstate NY

F26 needs some seats

Post by rsciolino »

anyone have a set of folding helm seats and hardware for an F26 they want to part with? I am in buffalo ny area
User avatar
Paul - SW Ontario
Moderate User
Posts: 233
Joined: Tue Apr 21, 2009 9:33 am
Location: Woodstock, Ontario
Contact:

Re: F26 needs some seats

Post by Paul - SW Ontario »

I do...
1973 Trojan F25.5 - SW, ON.
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
User avatar
Paul - SW Ontario
Moderate User
Posts: 233
Joined: Tue Apr 21, 2009 9:33 am
Location: Woodstock, Ontario
Contact:

Re: F26 needs some seats

Post by Paul - SW Ontario »

rsciolino wrote:anyone have a set of folding helm seats and hardware for an F26 they want to part with? I am in buffalo ny area
Image
Image
Image
Image
Image
1973 Trojan F25.5 - SW, ON.
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
rsciolino
Registered user
Posts: 39
Joined: Sun Feb 17, 2008 8:24 pm
Location: Upstate NY

Re: F26 needs some seats

Post by rsciolino »

pm sent
User avatar
zedtwentyate
Moderate User
Posts: 335
Joined: Sun Jun 01, 2014 10:46 am

Re: F26 needs some seats

Post by zedtwentyate »

If it doesn't work out with Paul, I have some as well. I'm in Syracuse.
Kegan

1986 Trojan F-27 (SOLD!!!)
1989 Trojan 10 Meter Mid Cabin
User avatar
zedtwentyate
Moderate User
Posts: 335
Joined: Sun Jun 01, 2014 10:46 am

Re: F26 needs some seats

Post by zedtwentyate »

mine are nowhere near as pretty as his, but they are free :)
Kegan

1986 Trojan F-27 (SOLD!!!)
1989 Trojan 10 Meter Mid Cabin
User avatar
Paul - SW Ontario
Moderate User
Posts: 233
Joined: Tue Apr 21, 2009 9:33 am
Location: Woodstock, Ontario
Contact:

Re: F26 needs some seats

Post by Paul - SW Ontario »

zedtwentyate wrote:If it doesn't work out with Paul, I have some as well. I'm in Syracuse.
Met Russ this past weekend....fine gentleman!
Wish him all the best with his intended splash this spring....looking forward to seeing some pics of his craftsmanship if he chooses to share some with us.

Here's To May for us Northerners. :lol:
1973 Trojan F25.5 - SW, ON.
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
User avatar
zedtwentyate
Moderate User
Posts: 335
Joined: Sun Jun 01, 2014 10:46 am

Re: F26 needs some seats

Post by zedtwentyate »

Paul - SW Ontario wrote:
zedtwentyate wrote:If it doesn't work out with Paul, I have some as well. I'm in Syracuse.
Met Russ this past weekend....fine gentleman!
Wish him all the best with his intended splash this spring....looking forward to seeing some pics of his craftsmanship if he chooses to share some with us.

Here's To May for us Northerners. :lol:

Excellent! I'm hoping May takes its time getting here. I still have to get the motors back together and into the 10 meter! I'm feeling the pressure for sure.

If Russ needs the hardware for the seats still (the part that mounts to the seat itself), i've got it. Let me know...
Kegan

1986 Trojan F-27 (SOLD!!!)
1989 Trojan 10 Meter Mid Cabin
User avatar
Paul - SW Ontario
Moderate User
Posts: 233
Joined: Tue Apr 21, 2009 9:33 am
Location: Woodstock, Ontario
Contact:

Re: F26 needs some seats

Post by Paul - SW Ontario »

zedtwentyate wrote:
Paul - SW Ontario wrote:
zedtwentyate wrote:If it doesn't work out with Paul, I have some as well. I'm in Syracuse.
Met Russ this past weekend....fine gentleman!
Wish him all the best with his intended splash this spring....looking forward to seeing some pics of his craftsmanship if he chooses to share some with us.

Here's To May for us Northerners. :lol:

Excellent! I'm hoping May takes its time getting here. I still have to get the motors back together and into the 10 meter! I'm feeling the pressure for sure.

If Russ needs the hardware for the seats still (the part that mounts to the seat itself), i've got it. Let me know...
Hopefully Russ checks his thread again and see's your offer. I did not have the SS legs or seat bottom attachments unfortunately.
Good luck with the motors, don't rush and be safe during the installs.

I yanked my single small block last fall before layup to install fresh rear main seals.
1973 Trojan F25.5 - SW, ON.
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
rsciolino
Registered user
Posts: 39
Joined: Sun Feb 17, 2008 8:24 pm
Location: Upstate NY

Re: F26 needs some seats

Post by rsciolino »

I just sent him a pm. thanks guys.
rsciolino
Registered user
Posts: 39
Joined: Sun Feb 17, 2008 8:24 pm
Location: Upstate NY

Re: F26 needs some seats

Post by rsciolino »

Paul-

Your seats are very happy in their new house. Just had to keep something on this boat vintage.


Thanks again- see you soon.

russ in buffalo
rsz_20170326_114837.jpg
rsz_20170326_114837.jpg (116.01 KiB) Viewed 9354 times
rsz_20170326_114853.jpg
rsz_20170326_114853.jpg (121.59 KiB) Viewed 9354 times
User avatar
Paul - SW Ontario
Moderate User
Posts: 233
Joined: Tue Apr 21, 2009 9:33 am
Location: Woodstock, Ontario
Contact:

Re: F26 needs some seats

Post by Paul - SW Ontario »

rsciolino wrote:Paul-

Your seats are very happy in their new house. Just had to keep something on this boat vintage.


Thanks again- see you soon.

russ in buffalo
rsz_20170326_114837.jpg
rsz_20170326_114853.jpg
Right on! Glad to hear.....you're boat looks fantastic!!!
Please more pics....you have our attention!
1973 Trojan F25.5 - SW, ON.
2012 Triple Axle trailer
1978 C&C Mega 30' Sailboat
2014 Triple Axle trailer
2016 Highfield CL290 BL RIB
2017 20hp Suzuki 4 stroke
User avatar
Paul
Active User
Posts: 1141
Joined: Fri Jun 10, 2005 1:02 pm
Location: Windsor Ont.

Re: F26 needs some seats

Post by Paul »

Nice looking cockpit. I noticed that you covered over the AC panel access at the lower port side of the bulkhead, did you relocate it into the cabin?
Paul
"Cruise Control" 1978 F-26HT
"No Control" 2012 9' Grand RIB
User avatar
Barrie
Moderate User
Posts: 322
Joined: Wed Nov 26, 2014 4:40 pm

Re: F26 needs some seats

Post by Barrie »

lOOKS GOOD! :lol:
Barrie
Aylmer Ontario, Canada
36' Tri-Fly "The Obvious"
rsciolino
Registered user
Posts: 39
Joined: Sun Feb 17, 2008 8:24 pm
Location: Upstate NY

Re: F26 needs some seats

Post by rsciolino »

I moved the galley to the port side so it was even with the head on the stbd side. Everything forward is the bunk area. The ac panel,inverters,chargers,sink and fridge are in the galley. Will post pics soon.

Also was very careful in making any changes to keep weight distributed evenly.
Post Reply