1976 F32 sport fish
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
1976 F32 sport fish
I have a bent prop shaft, and wonder, does anyone know the length of the shaft and a good place to buy one??
- prowlersfish
- 2024 Gold Support
- Posts: 12658
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
Re: 1976 F32 sport fish
You can check with Beacon to see if they have one , you''ll need your hull # as there was at least 3 shaft sizes used . My listings show 3 sizes for 1976 a 1 1/4" x 90" a 1 1/4" x 83 1/2" depending if its 1 to 1 or a reduction . it also shows a 1 1/4 x 86" or diesels . I believe they also used a 1" on some early F32s that's not showing on my spec sheet . I put no guarantee on my specs
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat