1975 F32 Trojan Endless Love <3

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

User avatar
EndlessLove
Registered user
Posts: 18
Joined: Thu Jul 18, 2019 7:42 am
Location: Greater Toronto Area, Ontario

1975 F32 Trojan Endless Love <3

Post by EndlessLove »

Hi all.. I was excited and posted my pictures in the pictures thread before an introduction :oops: correcting that now :D

I have acquired a 1975 Trojan F32 this year and have been living aboard for a couple months now. I'm still in transition and paring down on my belongings. It's been an eye opener to all the excess "stuff" you collect simply because you have the space! Definitely will be searching for some storage tricks on here, and have a try at a few ideas of my own.
Endless Love
Endless Love
IMG_20190527_212116.jpg (61.22 KiB) Viewed 9914 times
There is a lot of cosmetic work to be done on her but the bones are good - better than expected, so says my surveyor! I lucked out, apparently 8) I do have some minor leaking when it rains, which I'm told is attributed to the hatches, so I've already bookmarked a thread on rebuilding hatches.. I'm not opposed to DIY stuff, I just lack the confidence.. I figure this one is small and straight-forward enough to start with :mrgreen:

The previous owners have made some additions, such as the cabin windows, an A/C unit, new hot water tank and new flooring. They were far more mechanically advanced than I am so the engines have been well-kept - she runs great on the crazy waters of Georgian Bay :D Now we're down on Lake Ontario.

On the docket for me, I need to figure out the regular maintenance items and how often I need to do them and when those need to happen. :shock:

Other things I'm looking at:
-Finding / fixing leaks
-Fixing / replacing the canvas
-replace all cushions / fabrics
-overall wash / eventually wrap?
-refinishing teak all around
-figuring out how to cut down on the spiders :x
-anything pointed out to me that should have been obvious and shows my obvious newbie-ism :?:
- Mia
1975 F32 Flybridge Sedan
User avatar
EndlessLove
Registered user
Posts: 18
Joined: Thu Jul 18, 2019 7:42 am
Location: Greater Toronto Area, Ontario

Re: 1975 F32 Trojan Endless Love <3

Post by EndlessLove »

A few more pictures inside..
Port
Port
IMG_20190428_135736 (1).jpg (76.69 KiB) Viewed 9909 times
Starboard, lower helm
Starboard, lower helm
IMG_20190428_135742 (1).jpg (89.81 KiB) Viewed 9909 times
Looking aft
Looking aft
IMG_20190428_135810 (1).jpg (84.1 KiB) Viewed 9909 times
Dinette to starboard, vberth fore
Dinette to starboard, vberth fore
IMG_20190428_135946 (2).jpg (64.67 KiB) Viewed 9909 times
Vberth
Vberth
IMG_20190428_140014 (1).jpg (68.88 KiB) Viewed 9909 times
Starboard engine and generator
Starboard engine and generator
IMG_20190507_120113.jpg (140.68 KiB) Viewed 9909 times
Swan Family at the Marina
Swan Family at the Marina
IMG_20190713_202730_248.jpg (94.25 KiB) Viewed 9909 times
- Mia
1975 F32 Flybridge Sedan
User avatar
prowlersfish
2024 Gold Support
2024 Gold Support
Posts: 12645
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: 1975 F32 Trojan Endless Love <3

Post by prowlersfish »

Congrats on the F32 , glad you got a survey
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
User avatar
AwayOnBusine$$
Moderate User
Posts: 240
Joined: Sat May 09, 2015 5:53 pm
Location: 75 F32 Lake Simcoe Ontario

Re: 1975 F32 Trojan Endless Love <3

Post by AwayOnBusine$$ »

Welcome aboard!
My is a 75 F32 as well. I live on mine all summer on Lake Simcoe and then return to Florida for the winter. Like you mine was in pretty rough shape when we picked it up. Have continued to work at most of the exterior. Re-routed the shore power, city water and cable TV to starboard side. New bow puppet (Teak) re-did the swim platform, Flybridge latter and other trim work. New exhaust, canvas and nonskid deck paint, complete boat compound twice and 2 coats of wax this year. Love my boat and it's getting better all the time. Going to tackle fiberglass repair next, many holes from old electronics, dings and scratches to repair.
Attachments
3.jpg
3.jpg (84.01 KiB) Viewed 9895 times
9.jpg
9.jpg (96.27 KiB) Viewed 9895 times
16.jpg
16.jpg (64.97 KiB) Viewed 9895 times
18.jpg
18.jpg (79.93 KiB) Viewed 9895 times
Last edited by AwayOnBusine$$ on Fri Jul 26, 2019 7:42 am, edited 4 times in total.
F32 Fly 1975
User avatar
EndlessLove
Registered user
Posts: 18
Joined: Thu Jul 18, 2019 7:42 am
Location: Greater Toronto Area, Ontario

Re: 1975 F32 Trojan Endless Love <3

Post by EndlessLove »

prowlersfish wrote: Thu Jul 18, 2019 1:02 pm Congrats on the F32 , glad you got a survey
As am I :mrgreen: I figure it's my "house" and a "home inspection" has saved my butt before, so if for nothing but my sanity, I was hellbent on a survey.
Away wrote: Thu Jul 18, 2019 3:25 pm Welcome aboard!
My is a 75 F32 as well. I live on mine all summer on Lake Simcoe and then return to Florida for the winter. Like you mine was in pretty rough shape when we picked it up. Have continued to work at most of the exterior. New bow puppet (Teak) redbone the swim platform, Flybridge latter and other trim work. New exhaust, canvas and nonskid deck paint, complete boat compound twice and 2 coats of wax this year. Love my boat and it's getting better all the time. Going to tackle fiberglass repair next many holes from old electronics, dings and scratches to repair.
Ooo I am loving all the photos of Trojans and all the ideas they give me - I love your bench seat! I can't wait to get my teak all cleaned up too, it looks amazing! I've also got the swim deck and bow puppet. :)
- Mia
1975 F32 Flybridge Sedan
User avatar
AwayOnBusine$$
Moderate User
Posts: 240
Joined: Sat May 09, 2015 5:53 pm
Location: 75 F32 Lake Simcoe Ontario

Re: 1975 F32 Trojan Endless Love <3

Post by AwayOnBusine$$ »

20190704_160846_HDR.jpg
20190704_160846_HDR.jpg (78.39 KiB) Viewed 9857 times
23.jpg
23.jpg (47.74 KiB) Viewed 9857 times
22.jpg
22.jpg (100.54 KiB) Viewed 9857 times
6 coats of CETOL and 3 + 3 Of CETOL GLOSS except where you would walk. Ladder, swim platform, bow pulpit and foot pads. New coat each year.
Attachments
21.jpg
21.jpg (76.76 KiB) Viewed 9857 times
Last edited by AwayOnBusine$$ on Fri Jul 19, 2019 8:45 am, edited 2 times in total.
F32 Fly 1975
User avatar
captainmaniac
2024 Gold Support
2024 Gold Support
Posts: 1917
Joined: Sat Apr 30, 2005 10:26 pm
Location: Burlington, Ontario

Re: 1975 F32 Trojan Endless Love <3

Post by captainmaniac »

Just wanted to reinforce some of what Away has said.

See these posts:
Wood Finish examples (part 1)
https://www.trojanboats.net/wforum/view ... f=1&t=3206

Wood Finish examples (part 2)
https://www.trojanboats.net/wforum/view ... =1&t=12738

My 'wood finishes gallery' shows the kind of results you can get with different products. Swim platform and 'boarding strips' are Cetol (regular), as are boxes on the flybridge. Used it on my bridge ladder steps as well. Pulpit is Cetol Light with Cetol Gloss over top. Cockpit railing is an Interlux varnish (originally Goldspar Clear, now using Compass Clear as Goldspar Clear is discontinued), and ships wheel is Epifanes Woodfinish Gloss.

Cetol regular has more stain in it than Light, and some feel it has a bit of an orange cast that they don't like - I like it. Light is more transparent so its more 'natural' and you see grain more clearly, and any flaws. With either, you want at least 3-4 coats. The first couple will soak in to the teak, so you want to give it enough coats as a base to seal the wood and for new coats to just sit on top, and then add a couple coats to give it some depth.

Think I originally put 3 coats of Gloss over Lite on the pulpit. Again, don't use Gloss, or varnish for that point, on surfaces that people might walk on as it can be slippery when wet.

My experience has been a little different than Away's... I think I only needed about 4 coats of 'regular' or Light, and don't reapply annually. For most of my woodwork I just do a light sanding and touch up every 3-4 years. The boxes on the flybridge are not typically exposed to the elements, so I think I have only ever done them the one time.. about 18 years ago!

I keep the boat in Hamilton, so we are exposed to very similar environments.
Last edited by captainmaniac on Sun Sep 19, 2021 5:03 pm, edited 1 time in total.
User avatar
prowlersfish
2024 Gold Support
2024 Gold Support
Posts: 12645
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: 1975 F32 Trojan Endless Love <3

Post by prowlersfish »

Do you know why someone put such a large forward vent on ? (port side )
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
User avatar
EndlessLove
Registered user
Posts: 18
Joined: Thu Jul 18, 2019 7:42 am
Location: Greater Toronto Area, Ontario

Re: 1975 F32 Trojan Endless Love <3

Post by EndlessLove »

Thank you, Away and captainmaniac! Yes, your PB link still works - the Goldspar (or now Compass), and the Cetol Light is about the range I'm hoping to achieve. There is bits of varnish still clinging to the railings at this time; my surveyor was none too impressed and told me in no uncertain terms NOT to refinish it like that. :lol: The boxes on the flybridge are in really rough shape. I'm not sure they've ever been protected from the elements, or even touched up in their life.
prowlersfish wrote: Thu Jul 18, 2019 9:37 pm Do you know why someone put such a large forward vent on ? (port side )
From what I am told it's the A/C vent - the A/C unit lives on the starboard side under the dinette so I'm skeptical? I haven't yet ventured down there to follow it back. I hope I can replace it with something more sleek; it's quite the eyesore.
- Mia
1975 F32 Flybridge Sedan
User avatar
BradZ
Sporadic User
Posts: 161
Joined: Thu Oct 04, 2018 8:08 pm

Re: 1975 F32 Trojan Endless Love <3

Post by BradZ »

Welcome aboard and congrats. I'm almost a year into refitting a 1976 Trojan f-32. Pretty much the same boat you have. I can tell from the water stains in the salon, starboard side that you need to remove the gutter, fix all the cracks behind it. This is the seam from the factory that joins the flybridge deck and the salon roof together. You will have exposed gaps that will need repaired with thickened epoxy. Clean the gutter down to raw aluminum and then re-bed with 3M5200 and you will have no leaks anymore. Sealing the hatches is as simple as cleaning the old caulk where the hatch frame and the deck meet and re-caulking it. Also the screws that hold the hatch lid to the deck need to be sealed. I used butyl tape and countersunk the existing screw holes to allow the tape to seal around the screws. My hatches stopped leaking after that. Check out my thread for some insight.
Attachments
IMG_5731resized.jpg
IMG_5731resized.jpg (86.77 KiB) Viewed 9832 times
1976 Trojan F-32 Sedan Home Port is Catawba Island live in Wadsworth Ohio
User avatar
EndlessLove
Registered user
Posts: 18
Joined: Thu Jul 18, 2019 7:42 am
Location: Greater Toronto Area, Ontario

Re: 1975 F32 Trojan Endless Love <3

Post by EndlessLove »

BradZ wrote: Fri Jul 19, 2019 12:33 pm Welcome aboard and congrats. I'm almost a year into refitting a 1976 Trojan f-32. Pretty much the same boat you have. I can tell from the water stains in the salon, starboard side that you need to remove the gutter, fix all the cracks behind it. This is the seam from the factory that joins the flybridge deck and the salon roof together. You will have exposed gaps that will need repaired with thickened epoxy. Clean the gutter down to raw aluminum and then re-bed with 3M5200 and you will have no leaks anymore. Sealing the hatches is as simple as cleaning the old caulk where the hatch frame and the deck meet and re-caulking it. Also the screws that hold the hatch lid to the deck need to be sealed. I used butyl tape and countersunk the existing screw holes to allow the tape to seal around the screws. My hatches stopped leaking after that. Check out my thread for some insight.
Thank you :) The water stains are driving me crazy - that's another project to replace all that ceiling stuff (headliner? not sure of the name). But I need the leaks controlled first so I will definitely be checking out your thread!
- Mia
1975 F32 Flybridge Sedan
User avatar
EndlessLove
Registered user
Posts: 18
Joined: Thu Jul 18, 2019 7:42 am
Location: Greater Toronto Area, Ontario

Re: 1975 F32 Trojan Endless Love <3

Post by EndlessLove »

I have started cleaning up the rails and I'm now very aware of how I have no idea what colour teak actually is :lol:
It's not grey!
It's not grey!
IMG_20190728_105702.jpg (51.69 KiB) Viewed 9696 times
Beautiful grain
Beautiful grain
IMG_20190728_105730.jpg (70.24 KiB) Viewed 9696 times
- Mia
1975 F32 Flybridge Sedan
User avatar
prowlersfish
2024 Gold Support
2024 Gold Support
Posts: 12645
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: 1975 F32 Trojan Endless Love <3

Post by prowlersfish »

EndlessLove wrote: Fri Jul 19, 2019 7:55 am
prowlersfish wrote: Thu Jul 18, 2019 9:37 pm Do you know why someone put such a large forward vent on ? (port side )
From what I am told it's the A/C vent - the A/C unit lives on the starboard side under the dinette so I'm skeptical? I haven't yet ventured down there to follow it back. I hope I can replace it with something more sleek; it's quite the eyesore.
That is were a engine room vent/blower should be . Its much larger so it likely still has that behind it and maybe a added vent for something else ? It would be interesting to see what's there .
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
User avatar
AwayOnBusine$$
Moderate User
Posts: 240
Joined: Sat May 09, 2015 5:53 pm
Location: 75 F32 Lake Simcoe Ontario

Re: 1975 F32 Trojan Endless Love <3

Post by AwayOnBusine$$ »

Your Taft rails look like they have been neglected for about 20 years. Mine were not quite that bad. Tried the restoration products recommended. They did nothing. What's gonna work is (60 grit, 100 grit 150 grit then 220). Followed by several coats of CETAL as I mentioned previously.
Attachments
15.jpg
15.jpg (70.68 KiB) Viewed 9656 times
14.jpg
14.jpg (53.18 KiB) Viewed 9656 times
F32 Fly 1975
User avatar
EndlessLove
Registered user
Posts: 18
Joined: Thu Jul 18, 2019 7:42 am
Location: Greater Toronto Area, Ontario

Re: 1975 F32 Trojan Endless Love <3

Post by EndlessLove »

prowlersfish wrote: Sun Jul 28, 2019 12:44 pm That is were a engine room vent/blower should be . Its much larger so it likely still has that behind it and maybe a added vent for something else ? It would be interesting to see what's there .
I tried to look in to this yesterday but it ended up being built in to a box, in the storage walls in the salon. The box was fastened with a straight screwdriver, which I left in my car :roll: Is it supposed to be boxed up from the inside? The hoses (if that's what they are called) are really dirty, and torn in several places. Adding that to my list of things. They do run from under the engines, and from the A/C unit on the other side. So it seems that might be what is going on there. Will take pictures when I get it opened up.
- Mia
1975 F32 Flybridge Sedan
Post Reply