Trojan International 10 meter mid cabin bow pulpit removal and repair

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
BeaconMarineBob
Beacon Bob
Beacon Bob
Posts: 269
Joined: Thu Aug 06, 2009 6:39 pm
Location: Easton, PA
Contact:

Trojan International 10 meter mid cabin bow pulpit removal and repair

Post by BeaconMarineBob »

Eric Smith https://youtu.be/4L0DgtDk-sE

YouTube video
Bob Cushman, Owner
Beacon Marine Supply
Bob@BeaconMarineSupply.com
(609)713-4602
~ Please Contribute to the Forum ~
User avatar
El L Sea
2024 Gold Support
2024 Gold Support
Posts: 179
Joined: Fri Oct 23, 2015 8:27 am
Location: Fort Myers, FL

Re: Trojan International 10 meter mid cabin bow pulpit removal and repair

Post by El L Sea »

Our fiberglass guy removed all the coring and made the unit solid glass with some carbon fiber roving in it. Crazy solid now.
El L Sea
Fort Myers, FL
1988 Trojan 12m International Sport Fisherman
2017 Boston Whaler 130 Tender w/ 40HP Mercury
User avatar
RWS
Ultimate User
Posts: 2857
Joined: Sat Feb 18, 2006 7:01 am
Location: West Coast Florida
Contact:

Re: Trojan International 10 meter mid cabin bow pulpit removal and repair

Post by RWS »

Nice job !

Did the same on mine.

Removed the teak and replaced with Plasteak.

Installed new GOOD brand windlass

Moved windlass aft about 6-8" so it would dump rode into the deeper part of anchor locker

That mod required making the anchor locker hatch smaller fore/aft.

This was the PERFECT solution.

BEST !

RWS
1983 10 Meter SOLD after 21 years of adventures
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/

WEBSITE & SITELOCK TOTALLY SELF FUNDED
User avatar
BobCT
Active User
Posts: 1066
Joined: Mon Sep 07, 2009 9:01 pm
Location: New Haven CT

Re: Trojan International 10 meter mid cabin bow pulpit removal and repair

Post by BobCT »

Here's part 2. Can't believe this was ten years ago already.

https://youtu.be/Rs3oSagWUT4
1988 10m mid cabin
User avatar
Scott67
Registered user
Posts: 46
Joined: Wed Nov 03, 2021 8:44 am
Location: Jacksonville, FL

Re: Trojan International 10 meter mid cabin bow pulpit removal and repair

Post by Scott67 »

Is there a final video or photos of the finished product?

Thanks!
"Speakeasy"
1988 Intl 10 Meter Mid-Cabin Exp
Model 340
Twin 454 (350hp) Crusaders
1.5:1 Gearboxes
Jacksonville, FL
User avatar
BobCT
Active User
Posts: 1066
Joined: Mon Sep 07, 2009 9:01 pm
Location: New Haven CT

Re: Trojan International 10 meter mid cabin bow pulpit removal and repair

Post by BobCT »

Scott,

No, I never did a final video but all I did was paint it (roll and tip method). The repairs have held up great.


Bob
1988 10m mid cabin
User avatar
Scott67
Registered user
Posts: 46
Joined: Wed Nov 03, 2021 8:44 am
Location: Jacksonville, FL

Re: Trojan International 10 meter mid cabin bow pulpit removal and repair

Post by Scott67 »

BobCT wrote: Mon Oct 17, 2022 9:58 am Scott,

No, I never did a final video but all I did was paint it (roll and tip method). The repairs have held up great.


Bob
Thanks Bob, very informative in any case. Thanks for contributing it.

Scott
"Speakeasy"
1988 Intl 10 Meter Mid-Cabin Exp
Model 340
Twin 454 (350hp) Crusaders
1.5:1 Gearboxes
Jacksonville, FL
Post Reply