1974 Trojan F25 soft spots

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
KnightWill
Registered user
Posts: 1
Joined: Wed Apr 03, 2024 9:13 pm

1974 Trojan F25 soft spots

Post by KnightWill »

Looking at a Trojan F25 that has some soft spots on the bow and walkway to the bow. I’ve seen some videos of replacing the core. Can I remove some of the interior pieces and fix this from the inside?
User avatar
prowlersfish
2024 Gold Support
2024 Gold Support
Posts: 12665
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: 1974 Trojan F25 soft spots

Post by prowlersfish »

It is possible but it is much better and easier done from the top. I had the same issue and rather than cut it open, I used a product called injectadeck. I was happy withe the results.

Here is a link to the thread on my repair https://www.trojanboats.net/wforum/view ... ck#p111878
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
Post Reply