swim platform dinghy storage

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
foofer b
Ultimate User
Posts: 1320
Joined: Sun Oct 05, 2008 8:45 pm
Location: Black Creek, Florida
Contact:

swim platform dinghy storage

Post by foofer b »

I would like to store my watertender 9.4 dinghy on my swim platform, with davits (or chocks) and the dinghy leaning forward toward the transom. Can anyone tell me where to get the davits? Any pics out there too?
MY CURRENT FLEET
2003 KEY WEST 2020 WA
1978 14' ASHCRAFT SKIFF
Image
wet wonder
Registered user
Posts: 68
Joined: Mon Apr 27, 2009 1:22 am
Location: Philadelphia

Post by wet wonder »

I'd like to know as well.
1975 Trojan F-25 Express Hardtop
Mercruiser 351 233hp
12v system - Solar panels 170 watts
Safari
Registered user
Posts: 81
Joined: Sun Oct 01, 2006 11:01 am
Location: Worton Creek

Post by Safari »

Keep an eye out for used Weaver davits on Ebay or Craigslist. I got a set recently for $125. I looked at different types, but for my Trojan, I need the dink to sit on the back of the swim platform in order to get the right angle to lean against the transom - the Weaver seems to do this best. If you get them used, make sure you are getting the correct type (they make different types) and take note whether the rubber dink mounts are included and what condition they are in. Check out the site - http://store.weaverindustries.com/merch ... p=4&pid=25
Bill

1986 F36 Crusader 454s
wvorris@hotmail.com
gjrylands
Moderate User
Posts: 484
Joined: Fri Oct 17, 2008 2:57 pm
Location: Chicago. IL

Post by gjrylands »

The Weaver davits were mounted on my swim platform when I bought my boat. The previous owner had an inflatable that he stored on the swim platform. It held the inflatable perfectly.
(The inflatable didn't come with the boat, so I remover the brackets from the platform and no longer have them.)
Gerry
1979 F36 Twin Chryler 440's
Image
foofer b
Ultimate User
Posts: 1320
Joined: Sun Oct 05, 2008 8:45 pm
Location: Black Creek, Florida
Contact:

davits

Post by foofer b »

Thank you all for the info. It seems as if Weaver is the only game in town for davits. I checked all over the web and Craigslist, and found some new ones on Ebay for about half of retail and got them with the buy it now dealio.
MY CURRENT FLEET
2003 KEY WEST 2020 WA
1978 14' ASHCRAFT SKIFF
Image
wowzer52
Active User
Posts: 959
Joined: Sun Feb 03, 2008 1:21 pm
Location: Longview, Wa.

Post by wowzer52 »

Weaver is what I use. I didn't want to drill more holes in the swim platform so I sandwiched the slats with stainless to get the strength from all the slats and put several attaching scews between the slats, easy removal with no extra holes or marks and fully adjustable. I did the same with the swim ladder.
Image
1975 F-32 "SIMPLY BLESSED"
foofer b
Ultimate User
Posts: 1320
Joined: Sun Oct 05, 2008 8:45 pm
Location: Black Creek, Florida
Contact:

Post by foofer b »

Great idea with the brackets, it also spreads the load better.
MY CURRENT FLEET
2003 KEY WEST 2020 WA
1978 14' ASHCRAFT SKIFF
Image
User avatar
ready123
Ultimate User
Posts: 1841
Joined: Sat Nov 08, 2008 5:53 pm
Location: Mactier, Ontario Canada
Contact:

Re: swim platform dinghy storage

Post by ready123 »

foofer b wrote:I would like to store my watertender 9.4 dinghy on my swim platform, with davits (or chocks) and the dinghy leaning forward toward the transom. Can anyone tell me where to get the davits? Any pics out there too?
How about storing it horizontally? That allows you to use 4 stroke engines and leave them on the dinghy.
Look here:
http://www.hurleydavits.com/Davit.html
As setup on my boat with a Walker Bay and Yamaha 20HP
Image
With no dinghy:
Image
Last edited by ready123 on Fri May 29, 2009 5:44 pm, edited 1 time in total.
Michael
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
foofer b
Ultimate User
Posts: 1320
Joined: Sun Oct 05, 2008 8:45 pm
Location: Black Creek, Florida
Contact:

Post by foofer b »

The F 26 swim platform isn't really wide enuff for horizontal mounting of a dinghy, and the systems for doing so are even more expensive than the weaver vert mounts.
MY CURRENT FLEET
2003 KEY WEST 2020 WA
1978 14' ASHCRAFT SKIFF
Image
User avatar
ready123
Ultimate User
Posts: 1841
Joined: Sat Nov 08, 2008 5:53 pm
Location: Mactier, Ontario Canada
Contact:

Post by ready123 »

My platform is pretty narrow so I had to use the extension arms with the Hurley davits.... any narrower and you couldn't move about on my platform.
Is there really that much difference in price when you include the dinghy pads, davits and SS standoffs... when I priced mine they were pretty close. I was comparing new... I appreciate Weaver's will be more common used on eBay.
Michael
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
foofer b
Ultimate User
Posts: 1320
Joined: Sun Oct 05, 2008 8:45 pm
Location: Black Creek, Florida
Contact:

Post by foofer b »

The weavers were $169 for the kit, new. I don't plan on using stand offs unless it won't nest well against the transom. Plus when launched the only hardware on the platform is the s/s loops, no extension arms, pads etc.
MY CURRENT FLEET
2003 KEY WEST 2020 WA
1978 14' ASHCRAFT SKIFF
Image
User avatar
ready123
Ultimate User
Posts: 1841
Joined: Sat Nov 08, 2008 5:53 pm
Location: Mactier, Ontario Canada
Contact:

Post by ready123 »

foofer b wrote:I don't plan on using stand offs unless it won't nest well against the transom.
So you don't plan to leave the engine on? Taking it on and off each time gets very old for me....
Don't you have any concerns about the dinghy rubbing against the transom? Noise, damage... etc:
Michael
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
foofer b
Ultimate User
Posts: 1320
Joined: Sun Oct 05, 2008 8:45 pm
Location: Black Creek, Florida
Contact:

Post by foofer b »

Looks like I might have to use standoffs, eh.
MY CURRENT FLEET
2003 KEY WEST 2020 WA
1978 14' ASHCRAFT SKIFF
Image
LSP
Active User
Posts: 829
Joined: Thu Jul 31, 2008 6:55 pm
Location: Middle River, Md.

Post by LSP »

Not sure if anyone's interested or not....

http://www.boatered.com/forum/topic.asp?TOPIC_ID=127141
Image
Will - LSP
1976 F32 "Donegal"
1985 10 Meter "Whakanui"
Hog Pen Creek
Middle River, Md
Post Reply